Copying videoSQT0826 47Copying titlesCopying videoTo register the external HDD (USB HDD)Refer to “Registering the USB HDD”. (> 66)§1, 2, 3§1, 3§1 “For recorded titles (> 10)” only§2 The title in the source media will be deleted.§3 The recording mode cannot be changed.1 Insert or connect the media.2 Press [FUNCTION MENU].3 Select “Recorded Programmes” or“Video ( AVCHD )” in “Contents onHDD”, then press [OK].4 Select the title, then press the yellowbutton.A check mark is displayed. Repeat thisstep.• Press the yellow button again to cancel.5 Press the blue button.6 Set the copy direction, then press [OK].7 Select “Yes”, then press [OK].• If you select “No”, you can change theselection. (> 48, To change the selection)Start TimeProg.Type:Rec timeChannel Date Title NameMovie9:00 AM8 Set other settings, then press [OK].e.g.,(> 48, Setting the copying options)9 Select “Yes”, then press [OK].To copy HD Video (AVCHD) to the DVD-R inHigh DefinitionRefer to “Copying HD Video (AVCHD) to theDVD-R in High Definition”. (> 54)To copy video filesRefer to “Copying video files”. (> 55)Release the disc protectionRefer to “Disc Protection”. (> 83)• Simultaneous operation is not possible while copying withfinalising or creating Top Menu. However, the titles on theHDD can be played back while high speed copying withoutfinalising or creating Top Menu.Standby status can be changed if required.Please press OK to start copying.OKRETURNAutomatic Standby after Copy Off