RecordingSQT0826 332 Select the programme, then perform theoperations.To deactivate a timer programmePress the red button.• The timer icon “F” will change from red togrey.• Press the red button again to activate timerrecording standby. (The timer icon “F” willchange to red.)To delete a timer programmePress [DELETE].To resolve an overlap timer programmePress the green button.• The overlapped timer recording list willappear. (> 30)To edit a timer programme1 Press [OK].2 Change the timer recording options.• Refer to “Timer recording options”.(> 31)3 Press [OK].To show programme informationPress [STATUS ].To exit the timer recording listPress [EXIT ].To confirm and edit a timerprogramme1 Press [PROG/CHECK].Channel Name Schedule Mode SpaceOKRETURNPage UpPage DownTurnTimer OffTotal 3/32Timer Recording 30:30 DRHDD TUE 06.01.2015 8:05 AMDelete InfoNew Timer ProgrammeTUE 14.01TUE 14.0110:00 AM - 11:50 AM11:00 AM - 11:45 AM11:30 AM - 1:00 AM8:00 AM - 10:45 AMTUE 14.01TUE 14.01DRHGDRDROKOKResolve overlapGuideGuidee.g.,Screen iconsF Red: Timer recording standby is activated.Grey: Timer recording standby isdeactivated.[ Currently recording programmeA part or all of the programme will not berecorded since the programme isoverlapping.• Programme overlapping can be resolvedwith repeat programme if available.Select the programme, then press thegreen button.(> 30, If “Overlapped Timer Recording”screen appears)• This function is not available for the timerprogrammes that were set manually.The HDD is full.Copy-protected programmeIt was not recorded.The recording of the programme was notcompleted because of some reason.Auto Renewal Recording is set. (> 31)Guide Link (> 31)Series Timer Recording (> 30)OK Displayed if the recording can fit in theremaining space(Date)Daily or weekly timer programme is set.! It may not be possible to record because:- there is not enough space left.- the number of possible titles has reachedits maximum. (> 8)- programmes are deactivated, etc.Guide