Panasonic DMR-E30 Operating Instructions Manual

Also see for DMR-E30: Operating instructions Installation instructions Operating instructions Bedienungsanleitung

Contents

12Connections (with Scart leads)1 Connect the aerial to the RF Input socket of the DVDRecorder.2 Connect the RF lead from the RF Output socket ofthe DVD Recorder to the TV aerial input socket.3 Connect the AV1 21-pin scart socket to TV scartsocket (optional).≥This is necessary for Download from TV with Q Link function.≥If you use Panasonic TV with RGB output capability and want toreceive RGB signals, connect this unit to the AV1 socket on the TV.4 Connect the AV2 21-pin scart socket to the DVDRecorder Scart Socket on your Satellite Receiver/Digital Sat receiver. If you are not connecting aSatellite Receiver, skip this step.5 Connect the TV scart socket of your SatelliteReceiver to the AV2 scart socket of your TV(optional). If you are not connecting a SatelliteReceiver, skip this step.6 Plug the TV, DVD Recorder and Satellite Receiverinto the mains as shown at top of the page.Hints:≥For the United Kingdom:Q Link offers a range of convenient functions. For example,downloading of the tuning positions of all available televisionstations into your unit’s memory if you connect the unit to yourtelevision with a fully wired 21-pin Scart cable (not supplied).Features similar to Q Link have different names and may notwork the same.°1 [Q Link] is a registered trademark of Panasonic.°2 [DATA LOGIC] is a registered trademark of Metz.°3 [Easy Link] is a registered trademark of Philips.°4 [Megalogic] is a registered trademark of Grundig.°5 [SMARTLINK] is a registered trademark of Sony.For details, refer to your television’s operating instructions orconsult your dealer.≥Unlike in most commercially available 21-pin Scart cables, all 21pins of one plug on a fully wired 21-pin Scart cable are connectedto the matching pins on the other end of the cable.Reference:≥If the TV set is equipped with a 21-pin scart socket that featuresY/C signal separation, set the “AV1 Output” to “S-Video”(see page 61) so that you can play back with high picture qualityand use a fully-wired 21-pin Scart lead (not supplied) to connectthe DVD Recorder to the TV.This unitRF INVHF/UHFRF OUTThis unit TVAV1 (TV)This unit TVThis unitSatellite ReceiverAV2(DECODER/DECODEUR/EXT)TVSatellite ReceiverFollow the step-by-step guide below.12345666Aerial(not supplied)Aerial InputsocketTV [with or without Q link function](not supplied)To AC Mains socketAV2 socketAV1 socketRF lead(supplied)Necessary forTV with Q LinkNecessary for Connectinga Satellite Receiver21-pin Scart socket (DVD)21-pin Scart socket (TV)To AC Mains socketSatellite Receiver (not supplied)AC Mains lead (supplied)AC Input socketAV2 21-pin Scart socketAV1 21-pin Scart socketRF Output socketRF Input socketNote:21-pin Scart leads are not supplied.