Panasonic DMR-E30 Operating Instructions Manual

Also see for DMR-E30: Operating instructions Installation instructions Operating instructions Bedienungsanleitung

Contents

31Timer recordingUsing VIDEO Plus+* (G-CODE ) number tomake timer recording* VIDEO Plus+ : for the United Kingdom.G- CODE : for Hong Kong Special Administrative Region of China.G- CODE and VIDEO Plus+ are different trademarks used torepresent the same easy recording feature. However, forsimplicity, only the term VIDEO Plus+ will be used. If you useG- CODE system, follow the same steps listed for the VIDEOPlus+ system.[RAM] [DVD-R]Remote control onlyYou can easily programme the unit to make a timer recording of aprogramme by entering the programme’s VIDEO Plus+ (G- CODE)number, which can be found in the television sections ofnewspapers or in television guides. You can programme up to 16programmes one month in advance. Programmes for everyday orevery week are counted as one programme.Preparation≥Switch [DVD, TV] (15) to “DVD”.≥Ensure that this unit’s clock is set correctly.≥Insert a disc for recording (make sure there is enough room forthe programme you are going to record plus a little extra).1 Press [VIDEO Plus+] ([G-CODE ]) (2) button.

CODE >2 Press the numeric buttons (4) to enter the VIDEOPlus+ (G- CODE ) number.≥If you enter the wrong digit, use [2] (10) to move back andenter the correct digit.3 Press [ENTER] (10).≥The Timer Programme Correction screen which allows you toconfirm the programme appears and make corrections ifnecessary.≥Check the programme.To make corrections (page 32).To programme other recordings, repeat steps 1, 2, and 3.4 If the programme is correctPress [ENTER] (10).≥The Timer Programme List screen appears.5 Press [RETURN] (23).ª To put the unit on recording standbyPress [Á, TIMER] (12).Ensure “Á” lights on the unit’s display.RETURNNo.0:59 SPVIDEO Plus+ Remain12:53:00 16.7 TUE--0 9RETURNNo.0:59 SPG-CODE Remain12:53:00 16.7 TUE--0 9Enter VIDEO Plus+ Number by using 0-9 key. Enter G-CODE Number by using 0-9 key.RETURNNo.0:59 SPVIDEO Plus+ Remain12:53:00 16.7 TUE--0 91 1 1 1 1 1 1 1RETURNNo.0:59 SPG-CODE Remain12:53:00 16.7 TUE--0 91 1 1 1 1 1 1 11 1RETURNCANCELSELECT2:001:0016/ 7 TUEModeStopStartName Date1:58 SPTIMERRECORDING Remain12:53:00 16.7 TUEENTERSPRETURNSELECT2:001:003/ 26 TUEModeStopStartName Date1:58 SPTIMERRECORDING Remain12:53:00 16.7 TUEENTERSPPress ENTER to store new programme.Press ENTER to store new programme.PDC PDCOFF OFFCANCELBBC 1 BBC 1RETURNSELECTSP OK1:221:19BBC 1 16/ 7 TUE01Mode DiscspaceStopStartNo. Name Date1:58 SPTIMERRECORDING Remain1:19:00 16.7 TUEENTERNew Timer ProgrammeCANCELOFFPDC