13Connections (without Scart leads)1 Connect the aerial to the aerial input socket of theSatellite Receiver.≥If you do not have a Satellite Receiver, connect the aerial tothe RF Input socket of the DVD Recorder and go to step 3.2 Connect the aerial from Satellite Receiver to the RFInput socket.3 Connect the RF Output socket to the TV aerialsocket.4 Plug the TV, DVD Recorder and Satellite Receiverinto the mains as shown at top of the page.Notes:≥If you have an analogue satellite receiver, select [SKY ONE] or[SKY NEWS] on the receiver before starting Auto Setup.After Auto Setup is complete, the satellite position will be shownas [SAT] in the channel listing to denote programmes from thesatellite receiver.≥If you have a digital satellite receiver, you can start Auto Setupwith the receiver set to any channel.We recommend to manually name the [SAT] position after AutoSetup is complete. (See page 65.)Satellite ReceiverThis unitSatellite ReceiverRF INVHF/UHFRF OUTThis unit TVIf you do not have any scart leads and your TV is not Q Link type, you can connect your DVD Recorder to a TV and Satellite Receiver usingRF leads.Using this connection method may however be difficult to obtain a clear picture from the Satellite Receiver. For this reason it is notrecommended for inexperienced users.(See preferred connection on page 12.)144 324Aerial(not supplied)Aerial Input socketTV (not supplied)To AC Mains socketRF lead(not supplied)To AC Mains socketSatellite Receiver (not supplied)AC Mains lead (supplied)AC Input socketRF Output socketRF Input socketAerial Output socketRF lead (supplied)≥Must be connected towatch TV channels.Aerial Inputsocket