Panasonic DMR-E30 Operating Instructions Manual

Also see for DMR-E30: Operating instructions Installation instructions Operating instructions Bedienungsanleitung

Contents

15Auto Setup (with Q Link Functions)1 Switch the TV on. The TV automatically starts to tune all available TV stations and to adjust theclock. (This is called Auto Setup function.)≥When the TV has finished its own auto setup, the DVD Recorder is automatically switched on, and thedownloading of the setup data from the TV to the DVD Recorder starts.2 Switch [DVD, TV] (15) to “DVD”.3 When Download has finished, the screen for the Owner ID setting menu appears. Press [1111](10) and the numeric buttons (4) to enter a 4-digit PIN number.≥Make sure that you will remember the PIN number (make a note of it).4 Press [ENTER] (10) and [4444] (10). The cursor moves to “Name”.5 Press [1111] (10).6 Press [3333, 4444, 2222, 1111] (10) to select a letter and then press [ENTER] (10). Repeat this to enter thename.7 Enter “House No.” and “Postcode” in the same way.8 Press [RETURN] (23) to make the Owner ID setting disappear.RETURNDownloadDownload in progress, please wait.RETURN : to abortPos 4Indication during downloadingENTERRETURNSELECTOwner IDRETURN : leavePIN numberNameHouse No.Postcode¢¢¢¢Menu for Owner ID settingFINISHSTARTIf you do not have a Q Link TV, ignore this page and go to page 16.The Preset Download function can automatically copy the tuning position of all available TV stations into the DVD Recorder’s memory whenyou connect the DVD Recorder using a fully-wired 21-pin Scart lead to a TV equipped with the Q Link function.To Set Up this DVD Recorder with a brand-new Q Link TVPerform the following operation steps exactly as described to ensure that the Preset Download function works correctly.≥First of all, make sure that the DVD Recorder is switched off.Hint:≥If you use a Panasonic Q Link TV and perform the operation step 1 above, starting the downloading of the setup data will automaticallydisplay the “Download” indication. However, in case of a TV of another make, the “Download” indication may not appear. In this case, selectthe AV input on your TV if you want to see the “Download” indication.Notes:≥The explanations in this book refer to Panasonic Q Link TV and DVD Recorder, however they may also apply to other makes of TV and DVDRecorder with similar functions to Q Link. (See page 12 for details.)≥If you accidentally switch on the DVD Recorder before the TV, downloading of the setup data from the TV may not be performed correctly. Inthis case, follow the steps below.1) Wait until the Auto Setup is complete on both the TV and the DVD Recorder.2) Press [FUNCTIONS] (11) to display the top window on the TV screen and then use [3, 4, 2, 1] (10) to select “SETUP” and press[ENTER] (10).3) Use [3, 4, 2, 1] (10) to select “Tuning” and then “Download”.4) Press [ENTER] (10) and select “Yes”. Downloading of the setup data from the TV to the DVD Recorder starts.5) When the programme position and the current time appear in the DVD Recorder display, downloading is complete.