16POWERDVD/VHSto turn the unit on.– “HELLO” appears on the unit’s display.DRIVESELECTto select the drive (DVD or VHS).Insert a disc or VHS cassette.– Insert a disc or VHS cassette with enough remaining blank space(¼ 13).4a When the set top box is controlled with this unit:TRACKING/V-LOCKCHto select desired channel.or4b When the set top box is not controlled with this unit:INPUT SELECT to select “IN1” or “IN2”.– Select a channel on the connected equipmentREC MODEto select the recording mode.– Recording mode should be determined by program length andavailable time on selected media (¼ 22)Recording mode Remaining timeRECto start recording.Recording Set Top Box ProgramsPreparation:Turn on the television and select the appropriate video input to suit theconnections to this unit (example: AV input, etc.).When using the set top box, make sure it is turned on.[RAM] If the disc is protected, release protection (¼ 47).[VHS] Ensure accidental erasure tab is intact.Pausing RecordingPress [ PAUSE].– Press again to restart recording.Stopping RecordingPress [ STOP].Refer to “Important Notes for Recording” (¼ 21) and “Advanced Recording”(¼ 22–24) for detailed information on recording.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]POWERPOWERSLOW/SEARCHSCHEDULEOKFUNCTIONSTV/VIDEOPAUSESTOP3216549870REC MODERETURNSUB MENUCM SKIPDIRECTNAVAIGATAAORDISPLAYAUDIORECDRIVESELECTF Rec STATUSCHAPTERCREATEINPUT SELECTCANCEL DELETEDELETECHCHPLAYVOLA BDVD/VHSSETUPTRACKING/V-LOCKSKIP/ INDEX REW FFTIME SLIP/ JET REWRESET44TipsIcons such as “ [RAM] ” indicate usablediscs. Refer to pages 66 and 67.Notes[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]It takes about 30 seconds for the unitto complete recording managementinformation after recording fi nishes.You cannot change the channel orrecording mode during recording.Simultaneous recording to both DVDand VHS is not possible.Downloaded From DvDPlayer-Manual.com Panasonic Manuals