8Connecting to a Television and a Set Top Box 75 coaxial cable from the wall or satellite antenna to the “RF IN” or “SATELLITE IN” onthe set top box. 75 coaxial cable from the “RF OUT” on the set top box to the “VHF/UHF RF IN” on theTV. Audio/video cable (included) from the “DVD/VHS COMMON OUT” on the unit to the “AVIN” on the TV. Audio/video cable from the “AV OUT” on the set top box to the “IN1” on the unit. Connect the Set Top Box Control cable (included) to the back of this unit. Install the Set Top Box Control cable (included) in front of the set top box. AC power supply cord (included) from the “AC IN” on the unit to a household AC outlet. Consult your set top box provider about the appropriate set top box to use. Additional coaxial cable and audio/video (AV) cable are required.Note: The terminals on the rear of your TV and set top box may not appear as shownbelow. Please read terminal labels carefully to ensure correct connections.VHF/UHFRF INAUDIO IN VIDEOINR LAUDIO OUT VIDEO RF OUTOUTR L74RF IN/SATELLITE IN25AC IN OPTICALVIDEOR-AUDIO-LPRPBDIGITAL AUDIO OUT(PCM/BITSTREAM)S VIDEOVIDEOVIDEOR-AUDIO-LR-AUDIO -L O( )COMPONENT VIDEO OUTDVD/VHS COMMON OUTDVD PRIORITY OUTIN1DVD/VHS COMMON OUTVIDEOR-AUDIO-LVIDEOR-AUDIO -LS VIDEOIN1AV OUTSET TOP BOXCONTROLSET TOP BOXCONTROL6step31Cable from the wallor satellite antennaRear of set top boxstep stepstepstep stepRear of TVRear of this unitRed White YellowRed White YellowRed White YellowRed White YellowTo a household ACoutlet(AC 120 V, 60 Hz)The Set Top Box Control cableis necessary for operating a settop box with this unit’s remotecontrol.Place the Set Top Box Controlcable in front of the signalsensor of the set top box.Read the set top box operatinginstructions regarding positioningof the signal sensor.If necessary, use the double sidedadhesive tape (included) to secure the SetTop Box Control cable to a flat surface.Basic ConnectionstepDownloaded From DvDPlayer-Manual.com Panasonic Manuals