Panasonic DMR-EA38V Operating Instructions Manual

Also see for DMREA38V - DVD RECORDER - MULTI LANGUAGE: Operating instructions Quick setup guide

Contents

Panasonic DMR-EA38V Operating Instructions Manual Manual pdf 52 page image

52Setup Menus“Accessing the Setup Menu”You will have to perform the following step 1 for all otheroperations on pages 52−60.With the unit stoppedSETUPIR SettingsPerform step 1 of “Accessing the Setup Menu” (¼ above).Allow the set top box connected to this unit to be recognized bythis unit.If the set top box setup is changed, carry out “Test” (¼ right) tocheck whether or not the Set Top Box Control operates correctly.,  to select “Setup” then ,  to select “IR Settings”, thenOKIR SettingsSelect whether or not the set top box connected to this unit iscontrolled by this unit.,  to select “IR Settings”, thenOKAfter selecting “IR Settings” (¼ above, step 3).,  to select “On” or “Off”, thenOKSTB (Set Top Box) TypeSelect the service being used,  to select “STB (Set TopBox) Type”, then OKAfter selecting “IR Settings” (¼ above, step 3).,  to select “Cable Box/DVR”,“Satellite Box/DVR”, “Converter Box”or “IPTV/Other STBs”, then OKBrand NameSelect the set top box brand, , ,  to select the set topbox brand, then OK– You can also use [] or [] to view other pages.After selecting “IR Settings” (¼ left, step 3).Max. CH digitsSelect the maximum number of channel digits to be entered inyour set top box.After selecting “IR Settings” (¼ left, step 3).,  to select “Max. 2 Digit Channel(CH xx)”, “Max. 3 Digit Channel(CH xxx)” or “Max. 4 Digit Channel(CH xxxx)” ,then OKOK Key OperationSelect whether or not the selected channel is confi rmed bypressing [OK] in accordance with your Set top box., to select “On” or “Off”, then OKAfter selecting “IR Settings” (¼ left, step 3).Test,  to select “Test”, then OK– Confi rmation screen appears.OK– Perform steps 8 and 9 on page 11After selecting “IR Settings” (¼ left, step 3).,  to select “OK Key Operation”, then OK,  to select “Max. CH digits”, then OK,  to select “Brand Name”, then OK,  to select “Yes” or “No”, thenOKNotesChanged settings remain intact even when switching the unit tostandby.TipsTo return to the previous screenPress [RETURN]. Even if you have changed an option, thechange is not activated until you press [OK].To exit the screenPress [RETURN] several times.This must not be selected when “Converter Box” is selected for“STB (Set Top Box) Type” (¼ left).Downloaded From DvDPlayer-Manual.com Panasonic Manuals