Panasonic DMR-EA38V Operating Instructions Manual

Also see for DMREA38V - DVD RECORDER - MULTI LANGUAGE: Operating instructions Quick setup guide

Contents

Panasonic DMR-EA38V Operating Instructions Manual Manual pdf 56 page image

56Setup MenusDigital Audio OutputPerform step 1 of “Accessing the Setup Menu” (¼ 52).Change the settings when you have connected equipmentthrough the unit’s DIGITAL AUDIO OUT terminal (¼ 65).,  to select “Audio”, then ,  to select “PCM DownConversion”, then OKPCM Down ConversionAfter selecting “Digital Audio Output” (¼ above, step 3).Select how to output audio with a sampling frequency of96 kHz or 88.2 kHz. Signals are converted to 48 kHz or 44.1 kHzdespite the settings if the signals have a sampling frequency ofover 96 kHz or 88.2 kHz, or the disc has copy protection.,  to select “Digital AudioOutput”, then OK,  to select “On” or “Off”, thenOK[On] Signals are converted to 48 kHz or 44.1 kHz.(Choose when the connected equipment cannotprocess signals with sampling frequency of 96 kHz or88.2 kHz.)[Off] Signals are output as 96 kHz or 88.2 kHz. (Choosewhen the connected equipment can process signalswith sampling frequency of 96 kHz or 88.2 kHz.),  to select “Dolby Digital”,then OKDolby DigitalAfter selecting “Digital Audio Output” (¼ above, step 3).Choose whether to output by “Bitstream”, which processesDolby Digital signals on other connected equipment, or toconvert the signals to “PCM” (2ch) on the unit before output.,  to select “Bitstream” or“PCM”, then OKStatus MessagesPerform step 1 of “Accessing the Setup Menu” (¼ 52).Choose whether to show status messages automatically or not.,  to select “Display”, then ,  to select “Stereo 1”,“Stereo 2” or “Mix”, then OK[Stereo 1] Records audio (L1, R1)[Stereo 2] Records added audio such as narration (L2, R2)subsequent to original recording.[Mix] Records both Stereo 1 and Stereo 2.,  to select “DTS”, then OKDTSAfter selecting “Digital Audio Output” (¼ left, step 3).Choose whether to output by “Bitstream”, which processesDTS signals on other connected equipment, or to convert thesignals to “PCM” (2ch) on the unit before output.,  to select “Bitstream” or“PCM”, then OK[Bitstream] When you have connected the unit to equipmentdisplaying the DTS logo.[PCM] When you have connected the unit to equipmentthat doesn’t have the DTS logo.,  to select “Select AudioChannel For DV Input”, then OKYou can select the kind of audio when recording from the unit’sDV in terminal (¼ 27).Perform step 1 of “Accessing the Setup Menu” (¼ 52).Select Audio Channel For DV Input,  to select “Audio”, then [Bitstream] When you have connected the unit toequipment displaying the Dolby Digital logo.[PCM] When you have connected the unit toequipment that doesn’t have Dolby Digital logo.,  to select “StatusMessages”, then OK Incorrect settings can cause noise to be output which canbe harmful to your ears and speakers, and audio will not berecorded properly on media such as mini discs.Downloaded From DvDPlayer-Manual.com Panasonic Manuals