Panasonic DMR-EA38V Operating Instructions Manual

Also see for DMREA38V - DVD RECORDER - MULTI LANGUAGE: Operating instructions Quick setup guide

Contents

Panasonic DMR-EA38V Operating Instructions Manual Manual pdf 58 page image

584:3 TV settings for DVD-RAMPerform step 1 of “Accessing the Setup Menu” (¼ 52).You can select how to display the image on the TV when youwatch 16:9 images (DVD-RAM) on a 4:3 standard aspect TV.,  to select “TV Screen”, then,  to select “4:3”, “Pan andScan (Stretch to fi t)” or “Letterbox(Shrink to fi t)”, then OK,  to select “4:3 TV settingsfor DVD-RAM”, then OK[4:3] Recordings are played asrecorded.[Pan and Scan (Stretch to fit)] Video recorded for a widescreenis played with the sides cut off.[Letterbox (Shrink to fi t)] Video recorded for a widescreenis played in the letterbox style.Component Output SignalPerform step 1 of “Accessing the Setup Menu” (¼ 52).If you connected this unit and a TV with component videocables, select the item compatible with the connectedequipment.,  to select “TV Screen”, then,  to select “480i”, “480p”,“720p” or “1080i”, then OK,  to select “ComponentOutput Signal”, then OK[720p], [1080i]: Videos from DVD-Video or VHS are output with480p, irrespective of the settings.If the video is distorted when the settings are changed, thenpress and hold [] and [] on the main unit for 5 seconds ormore to set it back to [480i].If this unit is connected to an amplifier via an HDMI cable andaudio is not output when these settings are changed, thenuse a non-HDMI cable to connect the unit.If this unit is connected to an amplifier, etc. via an HDMI cablewith “HDMI Priority” set to “On”, the video will be fixed to 480i.Turn it “Off” and set it again.If the “TV Aspect” is set to “4:3” (¼ left), then “480i” or “480p”can only be selected.,  to select “Pan and Scan(Stretch to fi t)” or “Letterbox(Shrink to fi t)”, then OK[Pan and Scan (Stretch to fit)]Video recorded for a widescreen is played with the sidescut off if Pan & Scan was specified. If 16:9 softwareprohibits Pan & Scan, the image will appear in theletterbox style (with black bands above and below thepicture) despite the setting here.[Letterbox (Shrink to fi t)]Video recorded for a widescreen is played in theletterbox style.TV AspectPerform step 1 of “Accessing the Setup Menu” (¼ 52).This setting allows you to select the type of televisionconnected.,  to select “TV Screen”, then,  to select “4:3” or “16:9”,then OKNotes Aspect 4:3/16:94:3 16:94:3 standard aspecttelevision16:9 widescreentelevision Digital programs broadcast in the 16:9 aspect ratio mayappear with black bands at the edges of the screen on4:3 aspect televisions. The bands are added to enable thecorrect aspect ratio to be shown.,  to select “TV Aspect”, thenOK4:3 TV settings for DVD-VideoPerform step 1 of “Accessing the Setup Menu” (¼ 52).You can select how to display the image on the TV when youwatch 16:9 images (DVD-Video) on a 4:3 standard aspect TV.,  to select “TV Screen”, then,  to select “4:3 TV settingsfor DVD-Video”, then OKSetup MenusDownloaded From DvDPlayer-Manual.com Panasonic Manuals