16RQT9058POWERDVD/VHSto turn the unit on.– “HELLO” appears on the unit’s display.DRIVESELECTto select the drive (DVD or VHS).Insert a disc or VHS cassette.– Insert a disc or VHS cassette with enough remaining blank space(¼ 13).4a When the set top box is controlled with this unit:TRACKING/V-LOCKCHto select desired channel.or4b When the set top box is not controlled with this unit:INPUT SELECT to select “IN1” or “IN2”.– Select a channel on the connected equipmentREC MODEto select the recording mode.– Recording mode should be determined by program length andavailable time on selected media (¼ 22)Recording mode Remaining timeRECto start recording.Recording Set Top Box ProgramsPreparation:Turn on the television and select the appropriate video input to suit theconnections to this unit (example: AV input, etc.).When using the set top box, make sure it is turned on.[RAM] If the disc is protected, release protection (¼ 47).[VHS] Ensure accidental erasure tab is intact.Pausing RecordingPress [ PAUSE].– Press again to restart recording.Stopping RecordingPress [ STOP].Refer to “Important Notes for Recording” (¼ 21) and “Advanced Recording”(¼ 22–24) for detailed information on recording.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]POWERPOWERSLOW/SEARCHSCHEDULEOKFUNCTIONSTV/VIDEOPAUSESTOP3216549870REC MODERETURNSUB MENUCM SKIPDIRECTNAVAIGATAAORDISPLAYAUDIORECDRIVESELECTF Rec STATUSCHAPTERCREATEINPUT SELECTCANCEL DELETEDELETECHCHPLAYVOLA BDVD/VHSSETUPTRACKING/V-LOCKSKIP/ INDEX REW FFTIME SLIP/ JET REWRESET44TipsIcons such as “ [RAM] ” indicate usablediscs. Refer to pages 66 and 67.Notes[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]It takes about 30 seconds for the unitto complete recording managementinformation after recording fi nishes.You cannot change the channel orrecording mode during recording.Simultaneous recording to both DVDand VHS is not possible.