Panasonic DMR-EA38VK Operating Instructions Manual

Contents

Panasonic DMR-EA38VK Operating Instructions Manual Manual pdf 60 page image

60RQT9058Select Tape LengthPerform step 1 of “Accessing the Setup Menu” (¼ 52).Set the length of tape you are using so the unit can show thecorrect remaining time.,  to select “VHS”, then ,  to select “T120”, “T160” or“T180”, then OK,  to select “Select TapeLength”, then OK[T120] T30, T60, T90 and T120 tapes[T160] T140 and T160 tapes[T180] T180 tapesJet SearchPerform step 1 of “Accessing the Setup Menu” (¼ 52).Set the speed for Jet Search (¼ 34) when playing EP and VPtapes. It is possible to view the picture recorded in EP or VPmode at approx. 27 or 35 times speed.,  to select “VHS”, then ,  to select “27” or “35”,then OK,  to select “Jet Search”, thenOK[27] Select [27] if the picture is poor at [35].HDMI RGB Output Range,  to select “HDMI RGBOutput Range”, then OKEffective when connected to a device that only supports RGBoutput.After selecting “Functions of HDMI” (¼ 59, step 3).,  to select “Standard” or“Enhanced”, then OK[Enhanced] When the black and white images are not distinct.HDMI Audio Output,  to select “HDMI AudioOutput”, then OKAfter selecting “Functions of HDMI” (¼ 59, step 3).,  to select “On” or “Off”, thenOK[Off] Audio is output from an amplifier when using the DIGITALAUDIO OUT terminal (¼ 65).VIERA Link,  to select “VIERA Link”,then OKAfter selecting “Functions of HDMI” (¼ 59, step 3).,  to select “On” or “Off”, thenOK[On] When “On” is selected, you can operate other “HDAVIControl” compatible devices using “HDAVI Control”.NotesDepending on the equipment to connect, some items maybe shaded in gray on the display and cannot be selected, orchanging settings may be unavailable.Above items can be set when you set “HDMI Priority” to“On”.Setup MenusGray BackgroundPerform step 1 of “Accessing the Setup Menu” (¼ 52).Select whether or not the gray background is displayed when ablank section of a Video tape is played.,  to select “VHS”, then ,  to select “On” or “Off”, thenOK,  to select “GrayBackground”, then OK