Panasonic DMR-EH60 Operating Instructions Manual

Also see for DMREH60 - DVD RECORDER DECK: Operating instructions

Contents

Panasonic DMR-EH60 Operating Instructions Manual Manual pdf 27 page image

27RQT8307RecordingYou can check, change or delete a program set for scheduledrecording on the television screen.1 Press [SCHEDULE].2 Press [3, 4] to select the program.∫ To change the recording frequencyPress the “Green” button.∫ To change the time, recording mode andrecording drivePress [ENTER]. (➡ 24, To change the setting, step 4)∫ To delete the programPress the “Blue” button.∫ To exit the screenPress [TV GUIDE].Returns to the television screen.≥The unit is not off. To save power, turn the unit off by pressing[Í DVD POWER].∫ When there is a duplicate or overlappingprogram scheduled recordingThe program scheduled recording that was set last is recorded.None of the program that was set earlier is recorded even if there isonly partial overlapping.Program scheduled recordings that are not recorded are highlightedin grey.Check, change or delete a programFAVORITESSat 2:00pm Dodzilla OnceSat 1:00pm NWBG OnceSat 3:00pm Bull house WeeklySat 3:30pm Be switched Weekly4/3 4:00pm Baseball OnceLISTINGSMESSAGES SCHEDULERRRWRWRSET TIMERRECORDSat 1:00pm NWBG OnceREMOVE FREQUENCY INFO.87NWBGSPHDDR1:00 1:55Channel or program name (a program name that was setfor scheduled recording using TV Guide On Screen TMsystem or VCR Plusi system that was listed in theprogram list)Recording mode (➡ 21)Recording driveFrequency (➡ 24, Step 3,➡ 25, Step 4)Program set lastRecordedTimePrograms set earlier Not recordedNot recordedNotes on scheduled recording≥“F” flashes when the unit cannot go to scheduled recordingstandby.≥Scheduled recordings are activated regardless of whether theunit is turned on/off.≥Scheduled recordings do not begin while transferring (dubbing)in normal speed mode (➡ 43).≥If the unit is turned on when scheduled recording begins, itremains turned on after recording finishes. It does not turn offautomatically. You can turn the unit off during scheduledrecording.≥When you program successive scheduled recordings to startimmediately one after the other, the unit cannot record the partat the ending of the earlier program (approximately 15seconds). In addition, when recording to DVD-R, DVD-RW(DVD-Video format) or +R, the unit cannot record the part at thebeginning of the later program (approximately 15 seconds).e.g., When you program successive one hour scheduledrecordings to start at 10:00 and 11:00Program1 10:00–11:00Program2 11:00–12:00≥If you set DST (Daylight Saving Time) to ON when manuallysetting the clock (➡ 17), scheduled recording may not workwhen summer switches to winter and vice versa.∫ Relief RecordingWhen the recording drive is set to “DVD” for scheduledrecording and if the program will not fit onto the disc, therecording drive will be changed to the “HDD” automatically.If there is no disc in the tray or the disc cannot be recorded on orwhen scheduled recording starts while transferring (dubbing), therecording drive will be changed to the HDD.≥The Direct Navigator shows which programs were relief-recorded (“ ” is displayed.)(➡ 30).≥If the time remaining on the HDD is insufficient, as much of theprogram as possible will be recorded onto the HDD.Program1 Program2RecordedNot recorded (approximately 15 seconds)Recorded[-R] [-RW‹V›] [+R]Not recorded (approximately 15 seconds)11:00