Panasonic DMR-EH60 Operating Instructions Manual

Also see for DMREH60 - DVD RECORDER DECK: Operating instructions

Contents

Panasonic DMR-EH60 Operating Instructions Manual Manual pdf 47 page image

47RQT8307Transferring(Dubbing)Recording from a video cassette recordere.g.: Connecting other video equipment to the IN2 or DV inputterminalsYou can also connect to the IN1or IN3 input terminals on the rear.≥Turn off the unit and other video equipment before connecting.If the audio output of the other equipment is monauralConnect to L/MONO on the IN2 input terminals at the front.§ The S-VIDEO terminal achieves a more vivid picture than theVIDEO terminal.When recording from the unit’s DV terminalSelect the type of audio recording from “Select Audio Channel for DVInput” in the SETUP menu (➡ 56).When recording from DV equipment (e.g., digital video camcorder),you can record audio/video recordings from DV tape only.[HDD] [RAM] [-R] [-RW‹V›] [+R]Preparation≥Connect a video cassette recorder to this unit’s input terminals.≥Press [HDD] or [DVD] to select the recording drive.[Note]When recording using this unit’s input terminals, only the soundreceived at the time of recording will be recorded.As long as the secondary audio that is recorded on the videocassette is not output on the unit in play, it is not recorded.1 While stoppedPress [INPUT SELECT] to select theinput channel for the equipment youhave connected.e.g., If you have connected to IN2 input terminals, select “IN2”.2 Press [REC MODE] to select therecording mode.3 Start play on the other equipment.4 When you want to start recordingPress [¥ REC].Recording starts.To skip unwanted partsPress [;] to pause recording. (Press again to restart recording.)To stop recordingPress [∫].≥Using Flexible Recording (➡ 22), you can save the content of avideo cassette (approx. 1–8 hours) to a 4.7 GB disc with the bestpossible quality of recording without wasting disc space.[HDD] [RAM]When the “DV AUTO RECORDING” function is used, programs arerecorded as a title. At the same time chapters are created at eachbreak in the images and the playlist is created automatically.Preparation1 Turn off the main unit and DV equipment, then connect the DVequipment with the unit’s DV input terminal (➡ left column).2 Turn on the main unit and DV equipment.3 Pause play on the DV equipment at the point you want recordingto start.4 Press [HDD] or [DVD] to select the recording drive.1 While stoppedPress [FUNCTIONS].2 Press [3, 4] to select “OtherFunctions” and press [ENTER].3 Press [3, 4] to select “DV AUTORECORDING” and press [ENTER].4 Press [REC MODE] to select therecording mode.5 Press [2, 1] to select “Rec.” andpress [ENTER].Recording starts.When recording finishesThe confirmation screen appears. Press [ENTER] to finish DVautomatic recording.To stop recordingPress [∫].Manual recordingHDDHDD DVDDVD SDSD1 2 34 5 67 8 9FUNCTIONSTVGUIDESCHEDULECHCHSUB MENUSUB MENUTOPMENUSDUBBINGDUBBINGDVD/TVCH VOLUMETV/VIDEOINPUT SELECTAUDIOF RecSETUPCANCEL0VCR Plus+ CM SKIPSKIP SLOW/SEARCHSTOPSTOP PAUSEPAUSE PLAY/x1.3ENTERENTERRETURNRETURNCREATECREATECHAPTERCHAPTER Info STATUSSTATUSRECREC REC MODEREC MODE ERASEERASE DISPLAYDISPLAYPAGEPAGEDIRECTNAVIGATORTIMESLIPHDD, DVD;INPUT SELECT∫¥ RECREC MODEFUNCTIONS3,4,2,1ENTERI N 2I N 2C HC HHDD DVD SDS VIDEOS VIDEO VIDEOVIDEO L/MONOL/MONO-AUDIOAUDIO - ROPEN/CLOSEOPEN/CLOSE D R ID R I V EV ES E L E C TS E L E C T R E CR E CPOWER/x 1.3DVDV I NI NDV IN L/MONO - AUDIO - RVIDEOS VIDEOAudio/Video cableS-Videocable§Connect to Audio/Video output terminals.Yellow White RedThis unitOther video equipmentDV cable(IEEE 1394,4-pin)Almost all videos and DVD software on sale have beentreated to prevent illegal copying. Any software that hasbeen so treated cannot be recorded using this unit.DV automatic recording (DV AUTORECORDING)Notes on DV automatic recording≥Only one piece of DV equipment (e.g., digital video camcorder)can be connected to the unit via the DV input terminal.≥If you use video camcorders from other manufacturer’s theseare not guaranteed to work.≥It is not possible to operate the unit from the connected DV equipment.≥The DV input on this unit is for use with DV equipment only. (Itcannot be connected to a computer, etc.)≥The DV equipment name may not be shown correctly.≥Depending on the DV equipment, the images or audio may notbe input properly.≥The date and time information on the tape in the DV equipmentwill not be recorded.≥You cannot record and play simultaneously.If the DV automatic recording function does not work properly,check the connections and DV equipment settings, and turn theunit off and back on.If that does not work, follow the instructions for manualrecording (➡ left column).