RQT831418Recording television programs• You can record up to 99 titles on one disc.• You can record up to 49 titles on one disc.See also the notes “Important notes for recording” (Ô page 16).Note• You can create a Top Menu using “Create DVD Top Menu”(Ô page 35). Recording or editing on the disc may delete themenu. In that case, create the menu again.• It is not possible to record continuously from one side of adouble sided disc to the other. You will need to eject the disc andturn it over.Preparation• Turn on the television and select the appropriate video input to suitthe connections to this unit.• Turn the unit on.1 Press [; OPEN/CLOSE] on the mainunit to open the tray and insert a disc.• Press the button again to close the tray.• When using 8 cm (3″) DVD-RAM, or 8 cm (3″) DVD-R,remove the disc from the cartridge.2 Press [1 2 CH] to select the channel.To select with the numbered buttons:• Select the audio to record (Ô page 19).3 Press [REC MODE] to select therecording mode (XP, SP, LP, or EP).4 Press [* REC] to start recording.The elapsed time is shown on the display.Recording will take place on free space on disc. Data will notbe overwritten.• You cannot change the channel or recording mode duringrecording. You can change the channel or recording modewhile paused; however, the recording will then be as aseparate title.• You can record while the unit is in standby for scheduledrecording, but once the time for the scheduled recording tobegin is reached, any recording taking place will stop andthe scheduled recording will begin.n To pause recordingPress [h].Press again to restart recording.You can also press [* REC] to restart.(Title is not split into separate titles.)n To stop recordingPress [g].• From the start to the end of the recording is called one title.•It takes about 30 seconds for the unit to complete recordingmanagement information after recording finishes.n When recording the channel (not set on thisunit) from cable box or satellite receiver1 Select the channel on the equipment before turning the unit on.2 Press [1 2 CH] to select IN1 or IN2 in step 2 (Ô above).Off TimerThe unit switches to standby after about 6 hours in the stop mode.You can turn this feature off or change the time to 2 hours(Ô page 36, “Off Timer”).CHIN2DV INqF RecNumberedbuttonse,r,w,qENTER* RECREC MODEh1 2 CHgAUDIODIRECTNAVIGATORRETURNq2 CH 1 * REC; OPEN/CLOSESTATUSgRAM -R -R DL -RW(V)+R +R DL +RW+RWRAMAntenna Cable TVe.g., 5: [0] Ô [5] e.g., 5: [0] Ô [0] Ô [5]15: [1] Ô [5] 15: [0] Ô [1] Ô [5]115: [1] Ô [1] Ô [5]Insert label-up.Insert label-up withthe arrow facing in.Insert fully.g Cartridge discRemaining time on the disc-R -R DL -RW(V) +R +R DL +RW