Panasonic DMR-ES15M Operating Instructions Manual

Also see for DIGA DMR-ES15: Operating instructions Owner's manual Setup guide Setup guide Operating instructions

Contents

Panasonic DMR-ES15M Operating Instructions Manual Manual pdf 27 page image

RQT831427By using the FUNCTIONS window you may access the mainfunctions quickly and easily.1 While stoppedPress [FUNCTIONS].Functions displayed depend on the type of disc.2 Press [e,r] to select an item andpress [ENTER].• If you select “Other Functions”, press [e,r] to select an itemand press [ENTER].To exit the FUNCTIONS windowPress [FUNCTIONS].Status messages appear on the television during operation to showthe condition of the unit.Press [STATUS].The display changes each time you press the button.Video menu–Change picture qualityPictureSelect the picture mode.• Normal: Default setting• Soft: Soft picture with fewer video artifacts• Fine: Details are sharper• Cinema: Mellows movies, enhances detail in dark scenes.DNRReduces noise and picture degradation.On↔OffProgressive[Only when you have selected “480p” in “TV Type” (Ô page 14).]Select “On” to enable progressive output.• Select “Off” if the picture is stretched horizontally.• When progressive output is on, closed captions cannot bedisplayed.Transfer [Only when “Progressive” (Ô above) is set to “On”.]Select the method of conversion for progressive output to suitthe type of material being played (Ô page 44, Film and video).• Auto1 (normal):Automatically detects the film and video content,and appropriately converts it.• Auto2: In addition to “Auto1”, automatically detects filmcontents with different frame rates andappropriately converts it.• Video: Select when using “Auto1” and “Auto2”, and thevideo content is distorted.Line-in NR (Only when IN1, IN2 or DV is selected.)Reduces video tape noise while copying.Depending on the video signal, jittering may occur.• Automatic:Noise reduction only works on picture input from avideo tape.• On: Noise reduction works for any video input.• Off: Noise reduction is off. Select when you want torecord input as it is.Audio menu–Change sound effectV. Surround Sound(Dolby Digital, 2-channel or over only)Enjoy a surround-like effect if you are using two front speakersonly.• Turn V. Surround Sound off if it causes distortion.• Turn off the surround function on the connected equipment.• V. Surround Sound does not work for SAP recordings.Dialog Enhancer(Dolby Digital, 3-channel or over only, including a center channel)The volume of the center channel is raised to make dialogeasier to hear.Other menu–Change the display positionPosition1 (Standard) - 5: The higher the setting the lower the screenmoves.RAM -R -R DL -RW(V) +R +R DL +RW DVD-V DVD-A-RW(VR) VCDRAM -R -R DL -RW(V) +R +R DL +RW DVD-V DVD-A-RW(VR) VCDRAM -R -R DL -RW(V) +R +R DL +RW DVD-V DVD-A-RW(VR)RAM -R -R DL -RW(V) +R +R DL +RW DVD-V DVD-A-RW(VR)FUNCTIONS windowStatus messagesPlaybackProgramDeleteOther FunctionsFUNCTIONS Cartridge Protection OffDisc Protection OffDVD-RAMENTERRETURN1:45 SP12/24 6:34 PMT12 0:01.23 SP gggT12 0:12.34 SPRec.StereoDVD-RAMPlayRemainType of discRecording or play status/inputchannelSelected audio typeDate and timeAvailable recording timeand recording modeTitle number and elapsedtime during recording/Recording modeTitle number and elapsedtime during play/Recording modeNo displayUsing on-screen menus/FUNCTIONS window and Status messages