Panasonic DMR-ES15M Operating Instructions Manual

Also see for DIGA DMR-ES15: Operating instructions Owner's manual Setup guide Setup guide Operating instructions

Contents

Panasonic DMR-ES15M Operating Instructions Manual Manual pdf 39 page image

RQT831439MessagesThe following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.On the television PageCannot finish recordingcompletely.• The program was copy-protected.• The disc may be full.• The maximum number of times you can record the program is exceeded.———Cannot play. • You inserted an incompatible disc (Discs recorded in PAL video, etc.). —Cannot record on the disc. • The disc may be dirty or scratched. 6Unable to format.Please check the disc.Cannot record. Disc is full. • Create space by deleting any unnecessary titles.(Even if you delete recorded content from DVD-R, DVD-R DL, +R or +R DL, there is noincrease in disc space.)• Use a new disc.29, 33, 34—Cannot record. Maximumnumbers of titles exceeded.No disc • The disc may be upside down. —Please change the disc. • There may be a problem with the disc. Press [; OPEN/CLOSE] on the main unit to remove itand check it for scratches or dirt. (The unit turns off automatically after you open the tray.)6This is a non-recordable disc. • The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R,DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW.• You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW. Format the disc withthis unit.434This disc is not formattedproperly.5 • The operation is prohibited by the unit or disc. —On the unit’s displaySET(“ ” stands for a number.)• The remote control and main unit are using different codes. Changethe code on the remote control.Press and hold [ENTER] and the indicated number button at thesame time for more than 2 seconds.15HARD ERR(“HARD” and “ERR” arealternately displayed.)• If there is no change after turning the unit on and off, consult the dealer where the unit waspurchased.—NoREAD • The disc is dirty or badly scratched. The unit cannot record, play, or edit.• The message may appear when the DVD lens cleaner has finished cleaning.Press [; OPEN/CLOSE] on the main unit to eject the disc.6—NoWRIT • Recording may be unavailable due to a disc problem. Use a new disc. —NoERAS • Deleting an item may be unavailable due to a disc problem. Use a new disc. —PLEASE WAIT(“PLEASE” and “WAIT” arealternately displayed.)• Displayed when the unit is started. This is not a malfunction.• The unit is carrying out its recovery process. You cannot operate the unit while “PLEASEWAIT” is displayed.——UNSUPPORT(“UNSUP” and “PORT” arealternately displayed.)• You have inserted a disc the unit cannot play or record on. 4, 5UNFORMAT(“UNFOR” and “MAT” arealternately displayed.)• You have inserted a new DVD-RW/+R/+R DL/+RW or a DVD-RAM/DVD-RW (DVD-Videoformat) recorded on other equipment.34U59 • The unit is hot.The unit switches to standby for safety reasons. Wait about 30 minutes until the messagedisappears.Select a position with good ventilation when installing the unit. Do not block the vent on therear of the unit.—U61 • There was a power failure or the AC plug was disconnected while the unit was on. The unit iscarrying out its recovery process. This process restores the unit to normal operation. Theunit is not broken. Wait until the message disappears.—U88 • There was something unusual detected with the disc while recording or playing. The unit iscarrying out its recovery process. This process restores the unit to normal operation. Theunit is not broken. Wait until the message disappears.41U99 • The unit fails to operate properly. Press [POWER 8] on the main unit to switch the unit tostandby. Now press [POWER 8] on the main unit again to turn the unit on.—RAM -RW(V) +RWChanging the unit’s settings/Messages