Panasonic DMR-ES20DEB Operating Instructions Manual

Also see for Diga DMR-ES20DEB: Operating instructions Quick start guide

Contents

16COMPONENT VIDEO OUTConnecting a television with COMPONENT VIDEO input sockets! Press FUNCTIONS in stop mode.! Use to select [To Others] and confirm with ENTER.! Use to select SETUP and confirm with ENTER.! Use to select [Connection], , to select [Progressive] and confirm with ENTER.! Use to the select the [On] option and confirm with ENTER.COMPONENT VIDEO OUT socketThese sockets can be used for interlace or progressive output and deliver a clearer picturethan the S VIDEO OUT socket. Connections via these sockets output colour differencesignals (P /P ) and brightness signal (Y) separately. The properties of the COMPONENTB RVIDEO input socket are dependent on the television set or screen.Always connect sockets of the same colour.Connect the Audio cable to the corresponding audio input sockets of the television.If the AV1 Output setting in the SETUP menu is set to [RGB (without component)], nooutput will be available from the COMPONENT VIDEO OUT sockets. Set this option to[Video (with component)].If the unit is connected to the television via the VIDEO OUT, the S VIDEO OUT or the AV1socket, output takes place in the interlace format regardless of the settings.If your television with LCD or plasma screen supports the progressive procedure,connect it to the COMPONENT VIDEO OUT sockets.If you want to enjoy progressive-quality video, set Progressive to [On].Red/RWhite/LAudio cableABVideo cableAudioinputL/RGreen/YBlue/PBABRed/PRCAUDIO OUT L/RA BTVCOMPONENTVIDEO INPB PRYA B CVIDEOAUDIOLROUTS VIDEOAV4 INS VIDEO OUTPBPRYOPTICAL(PCM BITSTREAM)DIGITAL AUDIO OUTDVD-Recorder DVD-RecorderCOMPONENTVIDEO OUTPUTCOMPONENTVIDEO INProgressive output Progressive outputCOMPONENTVIDEO OUTPUTCOMPONENTVIDEO INProgressive television pictureThe progressive aspect ratio (height to width) is set to 16:9. DVD-Video with an aspect ratioof 16:9 will be displayed properly. However, video material with an aspect ratio of 4:3 will bedisplayed stretched to the right and left. If it is possible to adjust the aspect ratio ofyour television for progressive images, set the Progressive setting to [On].In normal televisions, progressive output can leadto flickering, even if the television is progressive-compatible. Make sure that the Progressivesetting is set to [Off].46If Progressive output is used, videos can be viewedat a high resolution, e.g. from DVD-Video. TheComponent Video Output of this unit is connectedwith the television set. Set Progressive to [On].Conventional TVsLCD/plasma TVs or LCD projectorsInformation for Progressive-compatible televisions (PAL)Downloaded From Disc-Player.com Panasonic Manuals