Panasonic DMR-ES20DEB Operating Instructions Manual

Also see for Diga DMR-ES20DEB: Operating instructions Quick start guide

Contents

Remote controlTrademark Code Trademark Code Trademark Code Trademark CodePanasonic 01-04,45 GOLDSTAR/LG 31 MIVAR 24 SALORA 26AIWA 35 GOODMANS 05,06,31 NEC 36 SAMSUNG 31,32,43AKAI 27,30 GRUNDIG 09 NOKIA 25-27 SANSUI 05,31,33BLAUPUNKT 09 HITACHI 22,23,31,40-42 NORDMENDE 10 SANYO 21SBR 06BRANDT 10,15 INNO HIT 34 ORION 37 SCHNEIDER 05,06,29-31BUSH 05,06 IRRADIO 30 PHILIPS 05,06 SELECO 06,25CURTIS 31 ITT 25 PHONOLA 31,33 SHARP 18DESMET 05,31,33 JVC 17,39 PIONEER 38 SIEMENS 09SINUDYNE 05,06,33DUAL 05,06 LOEWE 07 PYE 05,06 SONY 08ELEMIS 31 METZ 28,31 RADIOLA 05,06 TELEFUNKEN 10-14FERGUSON 10 MITSUBISHI 06,19,20 SABA 10 THOMSON 10,15,44X HOLDPoint the remote control at the unit’s sensor. Avoid obstacles in the path of thetransmission. The maximum range of the remote control is 7 m directly in front of the unit.Keep the transmission window and the unit sensor clean. The procedure can be impairedby direct sunlight or doors of glass cabinets.Operating a television setChange the remote control code to operate your television set.! Press and hold the TV on and off switch button.! Enter the two-digit code for your television set.The input must be repeated after batteries are changed.Child lockYou can lock the buttons of the unit and the remote control.! Press and hold RETURN and ENTER until appears in the display.The unit is now locked.! In order to unlock the child lock, repeat the procedure until disappears.Switching to AV input on your Panasonic television setSome television models of the brands listed above, (e.g. older Panasonic units), cannotbe operated using the remote control.! Press AV. Each press of the button switches between TV reception and AV input.Remote controlsignal sensor30°30°7mX HOLDIf you use another Panasonic device at the same location, change the mode of theremote control so that you can operate the units independently of each other.! Press FUNCTIONS in stop mode.! Use to select [To Others] and confirm with ENTER.! Use to select SETUP and confirm with ENTER.! Use to select [Others], to select [Remote Control] and confirm with ENTER.! Use to select the desired mode [DVD 1, 2 or 3] and confirm with ENTER.! ENTER button for approx. 2 seconds and, at the same time,enter the number that corresponds to the selected mode (1, 2 or 3).! Press RETURN to exit the menu.Press and hold theIf you want to operate two units independently of each other with the same remotecontrol, then change the mode of the remote control.Setting the remote control mode for unit.Accept the desired mode on the remote control.! Press and hold the ENTER button for approx. 2 seconds and, at the same time,enter the number that corresponds to the selected mode (1, 2 or 3).If the mode of the remote control does not correspond with that of the unit,[REMOTE DVD 1 / 2 / 3] will appear on the unit display.Setting the remote controlFUNCTIONSTuningDiscPictureSoundDisplayConnectionSETUPOthersOnDVD 1ClockQuick StartOwner IDShipping ConditionRemote ControlDefault SettingsSystem UpdateSELECTRETURNTABSELECTRETURNTABAutomatischAusDeutschRETURNDVD 1DVD 2DVD 3Remote ControlRETURNSELECTENTER7The input must be repeated after batteries are changed.Downloaded From Disc-Player.com Panasonic Manuals