17PBPRYOPTICALDIGITAL AUDIO OUT(PCM BITSTREAM)Amplifier (example)OPTICALOptical digitalaudio cablePush the jack all theway into the socketwith this side facingup.External devicesAudio cableRed/RWhite/LAmplifier (example)AUDIO OUT (L/R)AUDIO INLRVIDEOAUDIOLRAV4 IN OUTLRIn order to enjoy stereo or Dolby Pro Logic, connect the appropriate amplifieror an analogue audio component.! Connect the analogue output (L/R) e.g. to a Dolby Pro Logic amplifier.! As described, connect the Audio cable according to the colours and markingsof the connection sockets (white/L, red/R).Connecting an analogue amplifier or an analogue system componentConnecting a digital amplifier or a digital system component! Connect an amplifier with a Dolby Digital-, DTS- or MPEG decoder.! Use an optical digital audio cable.! In the Sound SETUP menu, change the [Digital Audio Output] settingaccording to your connected digital amplifier.You cannot use DTS Digital Surround decoders that are not suitable for DVD.This device can playbackstereo sound in Dolby Digital(2 channels). Connect anamplifier with built-in DolbyDigital decoder in order to beable to enjoy Surround Sound.Connect this unit to a devicewith a DTS decoder in order tobe able to play DVDs with thissymbol.45Before you connect the cable, make sure that the power to both devices isturned off. After you have connected the cables, switch both devices on.If the audio output of the other device is mono, connect it to the L/MONO socket.Both the left and the right channels will be recorded if the connection is made viathe L/MONO socket.Connecting to the AV3 input sockets (e.g. Camcorder)S VIDEO IN VIDEO IN L/MONO - AUDIO IN - RAV3ABCYellow (Video)White (L)Red (R)Audio/Video cableA B CS VIDEO IN VIDEO IN L/MONO - AUDIO IN - RAV3White (L)Red (R)Audio/Video cableS VIDEO cableA BABChoose one of the two connection possibilities.Connection with S VIDEO cable and audio cable (L/R) produces the best quality.Downloaded From Disc-Player.com Panasonic Manuals