ENTER ENTERDisplay Settings OptionENTER ENTERConnection Settings OptionTuningOthersDiscPictureSoundDisplayConnectionSETUP TV Aspect 16:9Progressive OffTV System PALAV1 Output RGBAV2 SettingsSELECTRETURNTABOn-Screen MessagesGrey BackgroundOn: The grey background is displayed when there is no television reception.FL DisplayChange the brightness of the unit display.[Automatic] [Off][Bright] [Dim][Automatic] [Off]Automatic: The screen messages are displayed on the screen.TV AspectTV SystemSelect the TV picture format of your television set.ProgressiveLetterbox: Black bar appear at the top and bottom of your screen.[16:9] [4:3] [Letterbox][PAL] [NTSC][On] [Off]On: In COMPONENT VIDEO OUT mode, the signal is displayed in full picture quality.PAL: You connect the unit to a PAL or multi-system television set.Programmes that were recorded with NTSC are played back as PAL60.NTSC: You connect the unit to an NTSC television set.Programmes that were recorded with NTSC are played back as NTSC.AV1 Output[Video ( with component )] [S Video (with component)][RGB ( without component )]Only COMPONENT VIDEO OUT.Switch to RGB for an improved picture quality.If RGB is set, no signal is available at COMPONENT VIDEO OUT.DVB Preferred SubtitlesNew Service Message[On] [Off]Select the language for DVB Subtitles.TuningDiscPictureSoundDisplaySETUP AV2 SettingsConnectionAV2 Input RGB/VideoOthersExt Link Ext Link 1New ServiceYes NoA new DVB service has been found.Add to the list of "All Services"?TuningOthersDiscPictureSoundDisplayConnectionSETUPOn-Screen Messages AutomaticGrey Background OnFL Display BrightSELECTRETURNTABDVB Preferred Subtitles EnglishNew Service Message AutomaticAutomatic: New digital stations are constantly scanned in the background. A message is displayed if new stationswere found and you can add them to you station list.AV2 InputRGB / VideoRGBRETURNSELECTENTERS VideoVideoAV2 SettingsPerform the settings in the following sub menus for the connected device.AV2 InputRGB / Video: Is detected automatically.RGB, Video, S Video: Input is switched to the selected signal.Ext LinkExt Link 1: For digital receivers that send a special recording control signal, e.g. the F.U.N. receiver (TU-DSF41).Ext Link 2: External recording control for satellites or digital receivers (video signal).[RGB / Video] [RGB] [Video] [S Video]AV2 Input, Ext Link[Ext Link 1] [Ext Link 2]TuningOthersDiscPictureSoundDisplaySETUPConnectionTV Aspect 16:9ProgressiveTV System PALAV1 Output RGBAV2 SettingsSELECTRETURNTABOff46FUNCTIONS Selection MenuSETUPTo OthersFUNCTIONSDVB onlyDVB onlyDownloaded From Disc-Player.com Panasonic Manuals