DVD HDDDVD-RAMHDDXPSPLPEP (6 Hours)EP (8 Hours)(9.4 GB)DVD-R5511122233344312468124682481612HDD3670138212284DVD-R DL /+R DLHDD RAM(8.5 GB)1:453:357:1010:4514:201:453:357:10-R DL +R DLRECREC MODERAM63PAUSE(4.7 GB)(160 GB) (250 GB) (4.7 GB)doublesided30PreparationDMR-EX75 DMR-EX85RAMHDDHDD RECPLAYPLAYHDDDVDDVD RECPLAYPLAYHDDDVD RAMRecording! Use DRIVE SELECT to select the DVD or HDD drive.Record! Press REC to start a recording.After the recording is complete, it takes some time for the unit to process the unitcontrol information.Pause the recording! Press PAUSE to pause the recording.Press PAUSE again or REC to resume recording.The title is not divided.HDD/DVD Recording of TV programmes! Select the station with CH or the numeric buttons.! Select the recording mode with REC MODE.Switch between SP, LP, EP and XP with each push of the button.! Press REC to start the recording.! Select STOP to stop the recording.If you resume recording, a new title will be created.! Press REC again to resume recording.You can only change the channel or recording mode in the PAUSE mode.The material is then recorded as a separate title.With AUDIO, you can switch the incoming audio channel during therecording. It has no effect on the recorded audio channel.Changing the recording mode! Press REC MODE in PAUSE or STOP mode.Switch between SP, LP, EP and XP each time the button is pressed.The material is recorded as a separate title with each switch.With the [EP ( 8Hours )] setting, playback on DVD-RAM compatibleDVD players may not be possible.Select [EP ( 6Hours )].Approximate recording times in hoursDVD/HDD Playback during recordingDuring the recording, you can start the playback from the beginning of theprogramme.! Press PLAY during recording or Timer RecordingAt least 2 second must have elapsed since the beginning of the recording.HDD/DVD functions possibleduring recording in each caseDVD: Insert a disc.If you activated write protection, cancel it. RAMNote for HDD: If you want to copy recorded titles in High Speed mode at a later pointin time, set the setting [Rec for High Speed Copy] to [On] in the Setup menu .Read page 50 for further information on High Speed Copy.63