Panasonic DMR-EX75 Operating Instructions Manual

Also see for DMR-EX75: Operating instructions Operating instructions Setup guide

Contents

76PageHDMI6665656566661717If you need helpWhich accessories are requiredto hear multi channel SurroundSound?Ó Multi channel sound can only be played back with this unit if it is connected withan HDMI cable or a digital audio optical fibre cable to an amplifier with anintegrated decoder.Switching on takes longer inspite of the Quick Start function.Ó All units connected by HDMI are checked while switching on.This can take a while.No picture on the television set. Ó Check whether the television set and DVD Recorder are connected correctly withthe HDMI cable. If the external unit has been connected correctly, the HDMImessage appears briefly on the display of the DVD Recorder.Ó If more than four units are connected with HDMI cables, you may possibly notbe able to see a picture. Reduce the number of connected units.Ó If the unit is connected via COMPONENT VIDEO OUT to a television unit whichis not progressive compatible, no unit can be connected with HDMI.The Progressive setting is automatically switched to [On] in the Setup menu if aunit is connected up with HDMI.Wrong screen format. Ó If a television set is connected via HDMI AV OUT, in the Setup menu, set thesetting Aspect for 4:3 Video to [4:3].Ó Check the setting TV Aspect in the Setup menu.Part of the picture appearsduplicated some of the timewhen using the outputCOMPONENT VIDEO OUT.Ó Do not connect this unit to the television set with an HDMI cable.Ó In the Setup menu, set the Progressive setting to [Off].No sound.Low volume.Sound with interference.The required audio typecannot be heard.Ó The amplifier connected via HDMI does not support CPPM and the HDMI Ver. 1.1.Standard. No Multi Audio Disc can be played back.Ó The sound is not played back if the Bitstream Signal is output from HDMI AV OUTor OPTICAL DIGITAL AUDIO OUT.Ó If more than four units are connected with HDMI cables, you may possibly nothear any sound. Reduce the number of connected units.Ó If the unit is connected with an HDMI cable to a television set and OPTICALDIGITAL AUDIO OUT is used as audio output, in the Setup menu, set thesetting Digital Audio Output to [Optical Only].Ó When one or several units are connected via HDMI AV OUT, it is possible forthere to be interference with the sound. Select another connection type.HDAVI Control is not working. Ó In the Setup menu, change the setting Control with HDMI / Q Link to[HDMI and Q Link].Ó Use a fully wired HDMI cable.Ó The connected unit possibly does not support HDAVI control.