Panasonic DMR-EX75 Operating Instructions Manual

Also see for DMR-EX75: Operating instructions Operating instructions Setup guide

Contents

FUNCTIONSAV2 Input RGB / VideoExt Link 1Ext LinkExt Link 2Ext Link Ext Link 2ENTER RETURNSELECT49SetupTuningDiscPictureSoundDisplayConnectionOthersAV2 SettingsSetting for external units (EXT LINK)You control the recording function via an external unit (e.g. a receiver) with EXTLINK. Connect the unit to the AV2 terminal with a 21-pin Scart cable.Ext Link 1: For digital receivers that send a special recording control signal, e.g.the F.U.N. receiver (TU-DSF41).Ext Link 2: External recording control for satellite or digital receivers (video signal).The Ext Link 2 setting cannot be used if the input signal is in NTSC format.! Press FUNCTIONS, select [To Others] with and press ENTER.! Select [Setup] with and press ENTER.! Select [Connection] with and [AV2 Settings] with , and press ENTER.! Select [Ext Link] with and confirm with ENTER.! Select [Ext Link 1] or [Ext Link 2] with and confirm with ENTER.! Press RETURN several times, in order to return to the television picture.Timer Recording via external unitsThe beginning of the recording may not be recorded correctly.The programming for a Timer Recording takes place on an external unit.Read the operating instructions for your external unit.Recording programming on an external unitSwitching the DVD Recorder to recording standby modeThe recording begins if an appropriate signal is received from a connected unit.As long as a video picture is transmitted by the external unit, the selected drivewill record it.! Select the recording drive DVD or HDD with DRIVE SELECT.! Press EXT LINK.Recording standby mode for EXT LINK controlled recordings is activated.The selected drive and EXT-L appear on the display.! Press EXT LINK to switch off recording standby mode.EXT-L disappears from the display.! Stop the transfer of the recording signal on the external unit.Switching off recording standby modePrematurely cancelling recording! Press EXT LINK to switch off recording standby mode.EXT-L disappears from the display.Playback during Ext Link on the selected drive! Press DIRECT NAVIGATOR.! Select a title with and confirm with ENTER.Playback starts.! Press STOP or DIRECT NAVIGATOR to end playback.Leave the menu DIRECT NAVIGATOR with RETURN.RAMHDD