Panasonic DMR-EX75 Operating Instructions Manual

Also see for DMR-EX75: Operating instructions Operating instructions Setup guide

Contents

7560DVB-T606567PageTV Guide676067If you need helpThe displayed information iswrong.Ó The broadcasting companies are responsible for the information. Deviations arepossible when changes are made at the last minute.No or incomplete data. Ó Date/Time incorrectly set.Ó The signal is too weak or no signal was found.Check the aerial. Realign the aerial and check the values with the Signal Qualityin the Setup menu.Ó The broadcasting companies are responsible for the information. Deviations arepossible when changes are made at the last minute.EPG database empty orincomplete after switching on.Ó Downloading the data was not possible. Switch the unit to Standby over night.Ó Activate the EPG Download in the Setup menu.No current data in spite of activeEPG Download function.Ó Downloading the data was not possible. Switch the unit to Standby over nightÓ Make sure that no Timer Recording was carried out during the time chosen forthe EPG Download.Ó The signal is too weak or no signal was found.Check the aerial. Realign the aerial and check the values with the Signal Qualityin the Setup menu.Ó In the Setup menu, switch the Active Antenna to [On] if you are using an activeantenna.Ó Repeat the Auto Setup.No station found.Time not set.Date/time incorrectly set. Ó The transfer did not work.Repeat the Automatic Time Setting.Unusual station sorting. Ó The station sorting of this unit is pre-defined. Use Profiles to sort the stationsas you want them.No teletext. Ó This DVD Recorder does not support teletext.No automatic station allocation inShowView.Ó No unique code for the digital stations. Allocate the stations manually whenprogramming for the first time. The DVD Recorder will then recognise thestations correctly in future.Which aerial is suitable forreceiving DVB-T?Ó Any (terrestrial) roof aerial can be used. Room rod aerials are also suitable.Use an active room aerial if the reception is poor.After the Auto Setup, there aren'tany stations in the station listalthough found stations weredisplayed during Auto Setup.Ó Shipping Condition was performed or the unit was in the delivery status.The Auto Setup was then started and interrupted.Start Auto Setup again and let it continue right through to the end. The datais only saved after this has been completed.