Panasonic DMR-EZ485V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

Panasonic DMR-EZ485V Operating Instructions Manual Manual pdf 13 page image

13The types of transmission:,  to select “Antenna” or“Cable”,then OKAutomatic Clock and Channel SettingsPlease select the wire connected to RF IN.CableAntennaOKConfi rm the time, then OK– DST (Daylight Saving Time) shows thesummertime setting.– Time Zone shows the time difference fromGreenwich Mean Time (GMT).See “Notes”(¼ right)Set Clock AutomaticallyClock Setting completed successfully.4/4/2008 11:15 AMDST----------- OnTime Zone---- ESTOKTipsIf the unit displays “No channels were found.”, turn off the unitand confirm the cable or antenna input is connected to the RF INterminal. Restart the set up again (¼ below).If “Auto Clock Setting is incomplete.” is displayed, press [OK]and set the clock manually (¼ right).If the clock is not correct, set the clock with “Adjust Time Zone”(¼ 58) or “Set Clock Manually” (¼ 58).You can delete channels you don’t need after completing AutoChannel Setting (¼ 55).Restarting the Auto-Setup(after relocation, for example)1. When the unit is on and stopped, press and hold [CH ] and[CH ] on the main unit at the same time for about 5 seconds.The unit turns off.2. Press [ DVD/VHS POWER] to turn the unit on.(The signal source and channel captions revert to their defaultvalues. All scheduled recordings are cleared.)To cancel in the middlePress [RETURN].Manual Clock SettingPerform steps 1–6 on page 12.,  to select the item you wantto change. Set Clock Manually/ :/ SAT AMMonth Day Year Hour Minute1 1 12 002000DST Time ZoneOff ESTOK,  to change the setting.– Repeat steps 7–8 to change other items.OKto confirm new date andtime.– The clock starts.NotesThe automatic clock setting can take a few minutes.The channel and clock settings apply to both DVD and VHS drives.Time ZoneEST (Eastern Standard Time)  GMT 5CST (Central Standard Time)  GMT 6MST (Mountain Standard Time)  GMT 7PST (Pacifi c Standard Time)  GMT 8AST (Alaska Standard Time)  GMT 9HST (Hawaii Standard Time)  GMT 10For other areas: xx hrDST (Daylight Saving Time)If you select “On”, the clock is advanced one hour beginning at2 a.m. on the second Sunday in March and ending at 2 a.m. on thefi rst Sunday in November.Set the DST period manually when it varies according to regions(¼ below).To set the DST period manually1. Press [FUNCTIONS].2. Press [, ] to select “Other Functions” then press [OK].3. Press [, ] to select “Setup” then press [OK].4. Press [, ] to select “Setup” then press [].5. Press [, ] to select “Clock Settings” then press [OK].6. Press [, ] to select “Set the time change dates for DST” thenpress [OK].7. Press [,  , ] to set the “Month”, “Day”, “Hour”, and“Minute” then press [OK].SetupSetupAudioDisplayTV ScreenVHSSet the time change dates for DSTChannelDiscVideo:SUN2nd AMMonthBeginningEndDay Hour Minute3 2 00:SUN1st AMMonth Day Hour Minute11 2 00OKRestore Default Reinitializes thesettings.OKto start automatic channel/clock setting.NotesConditions of the received channel may cause automatic channel/clock setting to take extra time.Getting StartedDownloaded From Disc-Player.com Panasonic Manuals