Panasonic DMR-EZ485V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

Panasonic DMR-EZ485V Operating Instructions Manual Manual pdf 2 page image

2CAUTION!THIS PRODUCT UTILIZES A LASER.USE OF CONTROLS OR ADJUSTMENTS ORPERFORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUSRADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.REFER SERVICING TO QUALIFIED PERSONNEL.WARNING:TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK ORPRODUCT DAMAGE,DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,DRIPPING OR SPLASHING AND THAT NO OBJECTSFILLED WITH LIQUIDS, SUCH AS VASES, SHALL BEPLACED ON THE APPARATUS.USE ONLY THE RECOMMENDED ACCESSORIES.DO NOT REMOVE THE COVER (OR BACK); THERE ARE NOUSER SERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.CAUTION!DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.ENSURE THE UNIT IS WELL VENTILATED. TO PREVENTRISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TOOVERHEATING, ENSURE THAT CURTAINS AND ANY OTHERMATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.The lightning flash with arrowhead symbol, withinan equilateral triangle, is intended to alert the userto the presence of uninsulated “dangerous voltage”within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shockto persons.CAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.NO USER-SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.The exclamation point within an equilateral triangleis intended to alert the user to the presence ofimportant operating and maintenance (servicing)instructions in the literature accompanying the ap-pliance.RISK OF ELECTRIC SHOCKDO NOT OPENCAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type recommendedby the manufacturer. Dispose of used batteries according tothe manufacturer’s instructions.THE FOLLOWING APPLIES ONLY IN THE U.S.A.Note to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC that provides guidelinesfor proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of thebuilding, as close to the point of cable entry as practical.The socket outlet shall be installed near the equipment andeasily accessible. The mains plug of the power supply cord shallremain readily operable. To completely disconnect this apparatusfrom the AC Mains, disconnect the power supply cord plug fromAC receptacle.THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interferenceby one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.FCC Caution: To assure continued compliance, follow theattached installation instructions and use only shielded interfacecables when connecting to peripheral devices.Any changes or modifications not expressly approved by theparty responsible for compliance could void the user’s authorityto operate this equipment.This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must acceptany interference received, including interference that may causeundesired operation.Declaration of ConformityTrade Name: PanasonicModel No.: DMR-EZ485VDMR-EZ48VResponsible Party:Panasonic Corporation of North AmericaOne Panasonic WaySecaucus, NJ 07094Support Contact:Panasonic Consumer Electronics CompanyTelephone No.: 1-800-211-7262(Inside of product)PrecautionsDownloaded From Disc-Player.com Panasonic Manuals