Panasonic DMR-EZ485V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

Panasonic DMR-EZ485V Operating Instructions Manual Manual pdf 61 page image

61Multi-channel TV Sound (Analog)Perform steps 1−3 of “Accessing the Setup Menu” (¼ 55).[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]Select whether to record the main or secondary audio program(SAP) when recording to these discs. (You cannot select theaudio type on the unit when recording audio from an externaldevice. Select it on the external device.),  to select “Audio”, then ,  to select “Multi-channel TVSound (Analog)”, then OK,  to select “Main” or“Secondary Audio Program(SAP)”, then OKMulti-channel TV Sound (Digital)Perform steps 1−3 of “Accessing the Setup Menu” (¼ 55).Select the preferred digital broadcast language.,  to select “Audio”, then ,  to select “Multi-channel TVSound (Digital)”, then OK,  to select “English”, “French”or “Spanish”, then OKDigital Audio OutputPerform steps 1−3 of “Accessing the Setup Menu” (¼ 55).Change the settings when you have connected equipmentthrough the unit’s DIGITAL AUDIO OUT terminal (¼ 72).,  to select “Audio”, then ,  to select “PCM DownConversion”, then OKPCM Down ConversionAfter selecting “Digital Audio Output” (¼ left, step 5).Select how to output audio with a sampling frequency of96 kHz or 88.2 kHz. Signals are converted to 48 kHz or 44.1 kHzdespite the settings if the signals have a sampling frequency ofover 96 kHz or 88.2 kHz, or the disc has copy protection.,  to select “Digital AudioOutput”, then OK,  to select “On” or “Off”, thenOK[On] Signals are converted to 48 kHz or 44.1 kHz.(Choose when the connected equipment cannotprocess signals with sampling frequency of 96 kHz or88.2 kHz.)[Off] Signals are output as 96 kHz or 88.2 kHz. (Choosewhen the connected equipment can process signalswith sampling frequency of 96 kHz or 88.2 kHz.),  to select “Dolby Digital”,then OKDolby DigitalAfter selecting “Digital Audio Output” (¼ left, step 5).Choose whether to output by “Bitstream”, which processesDolby Digital signals on other connected equipment, or toconvert the signals to “PCM” (2ch) on the unit before output.,  to select “Bitstream” or“PCM”, then OK[Bitstream] When you have connected the unit to equipmentdisplaying the Dolby Digital logo.[PCM] When you have connected the unit to equipmentthat doesn’t have Dolby Digital logo. Incorrect settings can cause noise to be output which canbe harmful to your ears and speakers, and audio will not berecorded properly on media such as mini discs.Setting MenusDownloaded From Disc-Player.com Panasonic Manuals