18POWERDVD/VHSto turn the unit on.– “HELLO” appears on the unit’s display.DRIVESELECTto select the drive (DVD or VHS).Insert a disc or VHS cassette.– Insert a disc or VHS cassette with enough remaining blank space(¼ 15).TRACKING/V-LOCKCH to select desired channel.Antenna Mode: Cable TV Mode:e.g. channel 4-2 e.g. channel 102-45– To select with the numbered buttons (¼ 16).– When no channel setting is performed on the unit and broadcastis recorded directly from the cable box or satellite receiver,select a channel on the connected equipment and press[INPUT SELECT] to select “IN1” or “IN2”.REC MODEto select the recording mode.– Recording mode should be determined by program length andavailable time on selected media (¼ 24)Recording mode Remaining timeRECto start recording.Recording Television ProgramsPreparation:Turn on the television and select the appropriate video input to suit theconnections to this unit (Example: AV input, CH3 or CH4).[RAM] If the disc is protected, release protection (¼ 52).[VHS] Ensure accidental erasure tab is intact.Pausing RecordingPress [ PAUSE].– Press again to restart recording.Stopping RecordingPress [ STOP].Refer to “Important Notes for Recording” (¼ 23) and “Advanced Recording”(¼ 24–26) for detailed information on recording.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]Digital broadcasts cannot be recorded to video tape. POWERPOWERSLOW/SEARCHSCHEDULEOKFUNCTIONSTV/VIDEOPAUSESTOP3216549870REC MODERETURNSUB MENUCM SKIPDIRECTNAVAIGATAAORDISPLAYAUDIORECDRIVESELECTF Rec STATUSCHAPTERCREATEINPUT SELECTDELETE FAVORITECHCHPLAYVOLA BDVD/VHSTRACKING/V-LOCKSKIP/ INDEX REW FFTIME SLIP/ JET REWRESETTipsIcons such as “ [RAM] ” indicate usablediscs. Refer to pages 74 and 75.Notes[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]It takes about 30 seconds for the unitto complete recording managementinformation after recording fi nishes.You cannot change the channel orrecording mode during recording.Simultaneous recording to both DVDand VHS is not possible.Downloaded From Disc-Player.com Panasonic Manuals