Panasonic DMR-EZ49VEB Operating Instructions Manual

Also see for DMR-EZ49VEB: Service manual

46VQT2J51Linked Operations with the TV (VIERA Link “HDAVI ControlTM”/Q Link)You can enjoy linked operations with the TV and receiverby using “VIERA Link” or Q Link.NotesThe following systems from other manufacturers have similar functionto Q Link from Panasonic.For details, refer to your television’s operating instructions or consultyour dealer.≥Q Link (registered trademark of Panasonic)≥DATA LOGIC (registered trademark of Metz)≥Easy Link (registered trademark of Philips)≥Megalogic (registered trademark of Grundig)≥SMARTLINK (registered trademark of Sony)Notes≥These functions may not work normally depending on the equipmentcondition.≥About “HDAVI Control” function, read the manual of the connectedequipment (e.g., TV) too.§1 This button is available only when this unit is on.§2 When this button is pressed, the playback image is not immediatelydisplayed on the screen and it may not be possible to watch thecontents from where playback started.In this case, press [:] or [6] to go back to where playbackstarted.§3 This function is available with the TV that supports “HDAVI Control3” or later.What is VIERA Link “HDAVI Control”? [VIERA]Link]VIERA Link “HDAVI Control” is a convenient function that offerslinked operations of this unit, and a Panasonic TV (VIERA) orreceiver under “HDAVI Control”. You can use this function byconnecting the equipment with the HDMI cable. See theoperating instructions for connected equipment for operationaldetails.≥VIERA Link “HDAVI Control”, based on the control functionsprovided by HDMI which is an industry standard known as HDMICEC (Consumer Electronics Control), is a unique function that wehave developed and added. As such, its operation with othermanufacturers’ equipment that supports HDMI CEC cannot beguaranteed.≥This unit supports “HDAVI Control 5” function.≥“HDAVI Control 5” is the newest standard (current as of December,2009) for Panasonic’s HDAVI Control compatible equipment.≥This standard is compatible with Panasonic’s conventional HDAVIequipment.≥Please refer to individual manuals for other manufacturers’equipment supporting VIERA Link function.Preparation:1 Connect this unit to your TV using an HDMI cable and a fully wired21-pin Scart cable, or to your receiver using an HDMI cable (> 12,77).2 Set “VIERA Link” to “On” (> 70). (The default setting is “On”.)3 Set the “HDAVI Control” operations on the connected equipment(e.g., TV).≥Set the input channel on VIERA to suit the terminal to beused as “HDAVI Control”.4 Turn on all “HDAVI Control” compatible equipment and select thisunit’s input channel on the connected TV so that the “HDAVIControl” function works properly.Also when the connection or settings are changed, repeatthis procedure.What is Q Link? [Q]Link]Q Link is a convenient function that offers linked operations of thisunit and a Panasonic TV. You can use this function by connecting theequipment with a fully wired 21-pin Scart cable.Preparation:≥ Connect this unit to your TV with a fully wired 21-pin Scart cable(> 10, 11).(When the TV is on) Easy playback[VIERA]Link] [Q]Link]When the TV is on and the following operations areperformed, the TV’s input will automatically switch toHDMI input mode ([VIERA]Link]) or AV input mode([Q]Link]) and the TV displays the corresponding action.(Picture or sound may not be available for the first fewseconds.)Press [FUNCTION MENU]§1, [1] (PLAY)§2 ,[DIRECT NAVIGATOR], [GUIDE], [PROG/CHECK]etc.(When the TV is off) Power on link[VIERA]Link] [Q]Link]When the TV is off and the following operations areperformed, the TV will automatically turn on anddisplays the corresponding action.(Picture or sound may not be available for the first fewseconds.)Press [FUNCTION MENU]§1, [1] (PLAY)§2,[DIRECT NAVIGATOR], [GUIDE], [PROG/CHECK]etc.≥[DVD-V] [CD] [VCD] [VHS] SVCD and MP3The TV is automatically turned on when you insert the discs orVHS.Power off link [VIERA]Link] [Q]Link]When you set the TV to standby mode, the unit is alsoautomatically set to standby mode. The unit isautomatically set to standby mode even if theFUNCTION MENU etc. is displayed, during playback orwhen the unit is set to a timer recording.Even if the TV is turned off, the unit will not be turnedoff at the same time when recording, copying, finalisingetc.≥When this unit is connected to an “HDAVI Control” compatiblePanasonic receiver with an HDMI cable, the receiver will also turnoff.Direct TV Recording [VIERA]Link] §3 [Q]Link][RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]This function allows you to immediately start recordingthe programme that you are viewing on the TV.≥Depending on the TV type connected with this unit, this functionmay not work.Press and hold [¥ DIRECT TV REC] for 1 second.Recording starts.To stop recordingPress [∫].≥If you switch TV channels while using Direct TV Recording, theDirect TV Recording stops.≥When “EXT-L” lights on the unit’s display (> 31), Direct TVRecording is unavailable.