Panasonic DMR-EZ49VEB Operating Instructions Manual

Also see for DMR-EZ49VEB: Service manual

72VQT2J51System Settings3, 4 select “Others” > 1 > 3, 4 select item >> Others > Setup(> 66, Accessing the Setup Menu)All factory default settings are indicated with “Underlined” text.OthersRemote Control (> 82)[DVD 1] [DVD 2] [DVD 3]Clock (> 14)Owner ID (> 13)In order to prevent another person from using this unit if it is stolen,you can set a PIN number and input your personal information.Once the PIN number has been set, you cannot return to the factorypreset. Make sure not to forget this.≥PIN number ≥Name ≥House No. ≥PostcodeFUNCTONMENUOKSetupPictureSoundDisplayConnectionTuningOthers RETURNSELECTTABDiscClockRemote Control DVD 1Owner IDStandby SettingsSystem UpdateInitializeVHSStandby Settings≥Press [OK] to show the following settings.Power Save in Standby[On] It will go into the Power Save in Standby modewhen the unit is in standby mode.[On Timer] “Power Save in Standby” is set to activateduring the setting time period. (> below)[Off] It is possible to start quickly from the standbymode. (Quick Start mode)1 Press [3, 4] to select “On Timer” and press [OK].2 Press [3, 4] to set the start time (hour).3 Press [2, 1] to select the stop time and press[3, 4] to set the stop time (hour).4 Press [OK] when you have finished the settings.≥You can also use the numbered buttons for setting.≥You can set start and stop time by the hour.≥If the clock has not been set, “Power Save in Standby” isactivated at all hours.Auto StandbySet the time to automatically turn the unit off.After the unit has finished operating, the unit will be turned offonce the set time has passed.[30 minutes] [1 hour] [2 hours] [4 hours][6 hours][Off] The unit will not automatically turn off.Auto Standby after OTR[On] This unit is turned to standby mode when this unit is notoperated for approximately 5 minutes after completingOne Touch Recording (> 29).[Off]Auto Standby after Copy[On] This unit is turned to standby mode when this unit is notoperated for approximately 5 minutes after completingcopy (> 57-61).[Off]RF OUT ( Aerial Signal )[On] Broadcast signals are output from this unit.TV can receive broadcast signals even if this unit is instandby mode when connecting TV with this unit usingthe RF cable (> 10).[Off] Press [2, 1] to select “Yes” when the confirmationmessage is displayed.Broadcast signals are not output from this unit to reducestandby power consumption.≥Power consumption is lowered additionally when“Power Save in Standby” is activated.≥If this unit turns into standby mode when connecting TVwith this unit using the RF cable, proper broadcastimages do not appear on TV.Power Save in StandbyPower Save On TimerTo 6 :00From 0 :00Saves standby power consumptionby disabling Quick Start function andAV2 loop-through in standby.Press OK to manually set the period ofPower Save.0 9NumberOK RETURNSELECTCHANGE