Panasonic DMR-EZ49VEB Operating Instructions Manual

Also see for DMR-EZ49VEB: Service manual

VQT2J5151[RAM] [+R] [+R]DL] [+RW]Use to prevent accidental erasure of titles.Perform steps 1 – 4 of “Accessing the Title View” (> 50).5 Press [3, 4] to select “Edit”, then press [OK].6 Press [3, 4] to select “Set up Protection” or “CancelProtection”, then press [OK].7 Press [2] to select “Yes”, then press [OK].[RAM]Use to remove unwanted parts of titles, such as commercials.Important: Once deleted, the parts cannot be recovered.Perform steps 1 – 4 of “Accessing the Title View” (> 50).5 Press [3, 4] to select “Edit”, then press [OK].6 Press [3, 4] to select “Partial Delete”, then press[OK].7 Press [OK] to set the “Start” point and then press[OK] again to set the “End” point of the section youwant to erase.– For quicker editing (> below, Tips)– To delete multiple sections:Press [3, 4] to select “Next”, and repeat this step.8 Press [3, 4] to select “Finish”, then press [OK].9 Press [2] to select “Delete”, then press [OK] toconfirm.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]Changes the thumbnail picture shown in the Title View screen.Perform steps 1 – 4 of “Accessing the Title View” (> 50).5 Press [3, 4] to select “Edit”, then press [OK].6 Press [3, 4] to select “Change Thumbnail”, thenpress [OK].7 Press [1] (PLAY) to start play.8 Press [OK] at the point you want to use as thethumbnail.– For quicker editing (> below, Tips)– To change the thumbnail:Restart play and press [3, 4] to select “Change”, thenpress [OK] at the point you want to use as thethumbnail.9 Press [3, 4] to select “Finish”, then press [OK].[RAM]You can divide a title into two.Once divided, titles cannot be recombined.Perform steps 1 – 4 of “Accessing the Title View” (> 50).5 Press [3, 4] to select “Edit”, then press [OK].6 Press [3, 4] to select “Divide Title”, then press [OK].7 Press [OK] at the point you want to divide.– For quicker editing (> below, Tips)– Selecting “Preview”, then pressing [OK] plays the titlefrom 10 seconds prior, to 10 seconds after the divisionpoint.– To change the point to divide at:Press [3, 4] to select “Divide”, then press [1] (PLAY)to bring to the point where you want to divide, thenpress [OK].8 Press [3, 4] to select “Finish”, then press [OK].9 Press [2] to select “Divide”, then press [OK].– The title is divided at that point.Set up Protection/Cancel ProtectionPartial DeleteNotes≥ You may not be able to specify start and end points within3 seconds of each other.≥ Available disc space may not increase after erasing shortparts of titles.BBC 0 27/10 MON07 08- - - -DIRECT NAVIGATOR Title VieDVD-RAMBBC 0 27/10The lock symbol appearswhen the title is protected.DIRECT NAVIGATOR Partial DeleteStartNextFinish0:43.21PLAY08End- -:- -.- - - -:- -.- -Start EndDVD-RAMOKRETURNVIDEOSet up ProtectionCancel ProtectionPartial DeleteChange ThumbnailDivide TitleEnter Title NameChange ThumbnailDivide TitleNotes≥ Divided titles retain the name of the original.≥ A short amount of video and audio just before and after thedivision point get cut out.≥ You cannot divide a title when the resulting parts are tooshort or total number of titles exceeds 99.DIRECT NAVIGATOR Change ThumbnailChangeFinish0:00.01- -:- -.- -ChangeDVD-RAM08OKRETURNStart play and select the imageof a thumbnail.VIDEOSet up ProtectionCancel ProtectionPartial DeleteChange ThumbnailDivide TitleEnter Title NameDIRECT NAVIGATOR Divide TitlePreviewDivideFinish0:00.00- -:- -.- -DivideDVD-RAM08OKRETURNSet up ProtectionCancel ProtectionPartial DeleteChange ThumbnailDivide TitleEnter Title Name VIDEOPLAYTipsFor quicker editing≥ Use Search (> 38) or Time Slip (> 39) to find the desired point.≥ To skip to the start or end of a title/chapter press [:] (start) or [9] (end).≥ For better precision, use Slow-motion (> 39) and Frame-by-Frame (> 39).