272APR 2002Edition 2.0DP-1510P/1810P/1810F/2010E5.2. Service Modes (For Facsimile)Note:This function is available for DP-1810F Only.5.2.1. Service Mode TableThe following service modes are provided to assist you in setting operational functions of the unit anddetermining the condition of the unit.No. Service Mode Description1 Function Parameter Setting Allows changes to the function parameters (the homeposition, etc.).2 RAM Edit Mode Factory use only.3 Print Parameter List / Reports Prints the Function Parameter List, Page Memory Test, PrinterReport, All Document File, Protocol Trace and Toner OrderForm.4 Modem Tests Generates various binary, tonal and DTMF signals, by themodem.5 Not Used6 RAM Initialization Initialize RAM and restore the default value of the functionparameters.7 Not Used8 Check & Call Allows input of information for Service Alert Report,Maintenance Alert Report and Toner Order Form.9 System Maintenance Used for Firmware Update, Firmware Backup, ParameterRestore, Parameter Backup, Transferring Firmware from thePC to the Flash Card and Sending a Received File during afatal printer error.10 Firmware Version Display the Firmware Version of Host, Scanner, Printer andModem.
