Panasonic DP-1510P Service Manual

Also see for DP-1510P: Operating instructions Operating instructions Operating instructions Technical guide

Contents

276APR 2002Edition 2.0DP-1510P/1810P/1810F/2010E029 REMOTEDIAGNOSTICS1 = Off (will not accept)2 = On (accepts)Selects whether the machine accepts RemoteDiagnostics from the service station.030 CED & 300 bps 1 = 75 ms2 = 1 secSelects the pause interval between the CED and the300 bps signal.(Used when Echo Suppression is disabled.)031 RTC = EOLx12 1 = Off (EOLx6)2 = On (EOLx12)Selects the RTC signal, EOLx6 or EOLx12.032 V34 TX START 2400-33600bps Selects the transmission modem start speed for V.34communication, 33600-2400 bps.033 V34 RX START 2400-33600bps Selects the receiving modem start speed for V.34communication, 33600-2400 bps.034 V34 TX SymbolRate2400-3429sr Selects the transmission symbol rate for V.34, 3429/3200/3000/2800/2400 sr.Press “V” or “/\ “ to select the symbol rate.035 V34 RX SymbolRate2400-3429sr Selects receiving symbol rate for V.34, 3429/3429/3200/3000/2800/2400 sr.Press “V” or “/\ “ to select the symbol rate.036 Not Used037 PROTOCOLDISPLAY1 = Off (not displayed)2 = On (displayed)Selects whether to display the modem speed duringcommunication.(Press the Job Status Key to display)038 Not Used039 FLASH TIME 5 = 50 ms~100 = 1000 msSelects the pause interval before activating the Flashkey.040 E/F TIME(For Germany,Austria andSwitzerland only)5 = 50 ms~100 = 1000 msSelects the pause interval before activating the Flashkey.041 PAUSE TIME 1 = 1 sec.~10 = 10 sec.Selects the pause interval from 1 sec. ~ 10 sec. fordialing through a switchboard or for internationalcalls.042 Not Used043 REDIALINTERVAL0 = no waiting~15 = 15 minutesSelects the redial interval from 0 to 15 minutes in 1minute steps.044 REDIAL COUNT 0 = no redial~15 = 15 timesSelects the redial count from 0 to 15 times in 1 stepintervals.Note:In order to comply with the requirements TBR21in the EC countries, do not select 15 times.045 RING DETECTCOUNT1 = 1 ring~9 = 9 ringsSelects the ring detection count from 1 to 9 rings in 1ring step intervals.046 ON-HOOK TIME 0 = 0 sec.~90 = 90 sec.Selects the on-hook time between sequentialcommunication calls in 1 second step intervals.047 RESPONSEWAIT1 = 1 sec.~90 = 90 sec.Selects the waiting interval for the response aftercompleting the dialing.Function Parameter TableNo. Parameter Selections Function