RQT832013This unit is not designed to control (turn on or changechannels on) your satellite receiver. However, you can useVIDEO Plus+ Recording by making the satellite receiver’sVIDEO Plus+ numbers available for recognition on this unit.Take the following steps to make all satellite stationsavailable for recognition on this unit.Through these steps, you can make timer recording fromsatellite stations with VIDEO Plus+ constantly available asthe unit keeps the setting in memory.Preparation• Turn on the Satellite receiver(s).• Select a correct station on the Satellite receiver(s).1 Press [VIDEO Plus+].2 Press the numbered buttons to enterthe VIDEO Plus+ number for a satellitestation (e.g. Sky One).• To correct the numberPress [w] to correct any mistakes.3 Press [ENTER].“––––” will appear in the “Name” column.4 Press [e,r] to select the channel orAV input that is to be used forrecording from the satellite station.5 Press [ENTER].6 Press [e] to select the programmethat you have just set and press [ ] todelete it from the timer recording list.It is no longer needed.Repeat the steps above until you have set dummy timerrecordings for each of the satellite stations that you willmake VIDEO Plus+ recordings from.To exit the screenPress [RETURN].Timer recording from satellitereceiver with VIDEO Plus+CANCELS SUB MENUVIDEO Plus+Record Remain 7/ 5 SUNSPInput PlusCode Number 0-9, and press ENTER.ENTERRETURN8:12:341:57Number--0 9S SUB MENUPlease select channel.Name Date Start Stop ModeTimerRecordingRemain 7/ 5 SUNSP7/ 5 SUN 19:00 20:00 SPENTERRETURNProgramme NameNumber--0 98:14:561:57CANCELTimerRecordingRemain8:15:45 7/ 5 SUN1:57 SPNameNo. Date7/ 5 SUNStart19:00New Timer ProgrammeStop20:00ModeSPDrivespaceOKENTERRETURNAV201S SUB MENU Timer OffACANCELTV Tuning (Auto Setup)