Panasonic Diga DMR-ES15EB Operating Instructions Manual

Also see for Diga DMR-ES15EB: Quick setup guide Service manual Reference guide Service manual

Contents

RQT832042Resetting channel settingRefer to the control reference on page 35.You can add or delete channels, or change programmepositions.1 While stoppedPress [FUNCTIONS].2 Press [e,r] to select “To Others” andpress [ENTER].3 Press [e,r] to select “Setup” andpress [ENTER].4 Press [e,r] to select “Tuning” andpress [q].5 Press [e,r] to select “Manual” andpress [ENTER].To delete a programme positionPress [e,r,w,q] to select a programme position andpress [A].To add a blank programme positionPress [e,r,w,q] to select a programme position andpress [B].To move a TV station to another programmeposition1 Press [e,r,w,q] to select a programme positionand press [C].2 Press [e,r] to select the new programme positionto which you want to assign the TV station andpress [ENTER].When the unit connected to a Q Link-compatible TVwith a fully wired 21-pin Scart lead sets itselfautomatically (Ô page 12), only deletion of theprogramme position can be performed.After performing steps 1–5 (Ô above)6 Press [e,r,w,q] to select aprogramme position and press[ENTER].Press [e,r] to select an item and press [q].You can restart auto channel setting if the channel receptionsetting (Ô page 12) fails for some reason.After performing steps 1–4 (Ô left)5 Press [e,r] to select “Auto-SetupRestart” or “Download from TV” andpress [ENTER].The confirmation screen appears.Select “Download from TV” when you connect the unitto a Q Link-compatible TV with a fully wired 21-pinScart lead. (Programme positions are downloadedfrom the TV and copied through this convenientfunction.)6 Press [w,q] to select “Yes” and press[ENTER].You can also use the following method to restart Auto-Setup.When the unit is on and stoppedPress and hold [2 CH] and [CH 1] on the main unit forabout 5 seconds.• All the settings except for the ratings level, ratingspassword, Owner ID and time settings return to the factorypreset. The timer recording programmes are alsocancelled.To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].To change detailed station settingsSetupTuningDiscPictureSoundDisplayConnectionOthersManualAuto-Setup RestartDownload from TVTABENTERSELECTRETURNManual TuningPos Name Ch Pos Name ChDeleteAddMove12342223242526567891011121314151617181920ENTERRETURNSELECTBBC 1BBC 2ITVCH4CH5B CANotePosNameChannelNICAMRETURN : leaveManualTuningTitle PageRETURNCHANGE122AutoBBC 1301Pos To change the programme position inwhich the TV stations are assignedPress [e,r] or the numbered buttons to selectthe number of the desired programme positionand press [ENTER].Name To enter or change the name of a TVstationPress [e,r,w,q] to enter station name andpress [ENTER].If the station name needs a blank space,select the blank between “Z” and “ ”.Channel To enter newly available TV stations orchange the channel number of an alreadytuned TV stationPress [e,r] or the numbered buttons to enterthe channel number of the desired TV station.Wait a few moments until the desired TVstation has been tuned.After the desired TV station is tuned, press[ENTER].NICAM To select the type of sound to be recordedPress [e,r] to select “Auto” and press[ENTER].• Select “Off” if you want to record the normal(mono) sound during a stereo, bilingual orNICAM broadcast, or if the stereo sound isdistorted due to inferior reception conditions.Title Page To enter the Teletext title page for achannelEntering title page number allows the unit toautomatically record programme and stationnames.Press [e,r] or the numbered buttons to enterthe number and press [ENTER].• To find the correct title page for the station,refer to its Teletext TV guide.• The unit’s clock must be set correctly.Automatic setting