Panasonic Diga DMR-ES15EB Operating Instructions Manual

Also see for Diga DMR-ES15EB: Quick setup guide Service manual Reference guide Service manual

Contents

RQT832041Refer to the control reference on page 35.• In the case of a power failure, the clock setting remains inmemory for approximately 60 minutes.1 While stoppedPress [FUNCTIONS].2 Press [e,r] to select “To Others” andpress [ENTER].3 Press [e,r] to select “Setup” andpress [ENTER].4 Press [e,r] to select “Others” andpress [q].5 Press [e,r] to select “Clock” andpress [ENTER].6 Press [e,r] to select “Off” of“Automatic” and press [ENTER].7 Press [w,q] to select the item youwant to change.The items change as follows:8 Press [e,r] to change the setting.You can also use the numbered buttons for setting.9 Press [ENTER] when you havefinished the settings.The clock starts.To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].NoteIf a TV station transmits a time setting signal, and when“Automatic” in the Clock setting menu is set to “On”, theautomatic time correction function checks the time and ifnecessary it is adjusted several times every day.Tabs Menus Options (Underlined items are the factory presets.)Connection(Continued)AV2 SettingsSet to match the connected equipment.• Press [ENTER] to show the following setting.AV2 InputThis setting is according to the output signal ofthe connected equipment.• Video • S VideoExt LinkThis setting cannot be made when the “TVSystem” is set to “NTSC” (Ô page 43).• Ext Link 1: When a satellite/digital terrestrial receiver (SKYDigital STB etc.) which transmits a specialcontrol signal recordings via the 21-pin Scartlead is connected.Start and stop timings of recording arecontrolled by the control signal (SKY DigitalSTB/digital terrestrial receiver using the “SKYPersonal Planner” function).• Ext Link 2:When an external equipment with a timerfunction is connected.When it turns on, recording starts.When it turns off, recording stops.Others Remote Control (Ô page 15) • DVD 1 • DVD 2 • DVD 3Clock (Ô below)Owner ID (Ô page 12)In order to prevent another person from using thisunit if it is stolen, you can set a PIN number and inputyour personal information.Once the PIN number has been set, you cannotreturn to the factory preset. Make sure not to forgetthis.• PIN number• House No.• Name• PostcodeInitialize• Press [ENTER] to show the following setting.Shipping ConditionAll the settings except for the ratings level, ratingspassword, Owner ID and time settings return tothe factory preset. The timer recordingprogrammes are also cancelled.• Yes • NoDefault SettingsAll the settings except for the programmedchannels, time settings, disc language settings,ratings level, ratings password, Owner ID andremote control code return to the factory presets.• Yes • NoSet the clock manually• Usually, the unit’s channel reception setting function(Ô page 12) automatically adjusts the clock to correcttime. Under some reception conditions, however, the unitcannot set the clock automatically.• In this case, follow the operation steps below to manuallyset the clock.ClockAutomatic OffTime Date15 : 45 : 39Please set clock manually.0 97 5/ / 2006ENTERRETURNCHANGE SELECTNumberENTER : store RETURN : leaveHour Minute Second Day Month YearChanging the unit’s settings/Set the clock manually