Panasonic Diga DMR-EX89 Operating Instructions Manual

Also see for Diga DMR-EX79: Operating instructions Operating instructions Operating instructions

Contents

27RQT9414Advancedoperations4 Press [OK].The timer programme is stored and the timer icon isdisplayed.“F” lights on the unit’s display to indicate timer recordingstandby has been activated.Repeat steps 2–4 to programme other recordings.Press [Í] to turn the unit off.1 While the unit is onPress [∫].2 Press [2, 1] to select “StopRecording” and press [OK].If you stop a timer recording, it will be cancelled. However, ifyou have set a weekly, daily or series timer recording, therecording will start from the next time the timer recording isset.Even when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press the “Red” button.≥The timer icon “F” (> 28) disappears from the timerrecording list.≥You cannot cancel timer recording standby mode as long aseven one timer icon “F” (> 28) remains in the timerrecording list.≥Press the “Red” button again to activate timer recordingstandby.When the recording drive is “DVD” and there is not enoughremaining space, recording automatically switches to the “HDD”. Ifthere is no disc in the tray or the disc cannot be recorded on or whentimer recording starts while copying, the recording drive will bealtered to the HDD.≥The DIRECT NAVIGATOR shows which programmes were relief-recorded (“ ” is displayed.) (> 33).≥If the time remaining on the HDD is insufficient, as much of theprogramme as possible will be recorded onto the HDD.[HDD]If you record a programme onto HDD repeatedly everyday or everyweek using timer recording, or if you record a programme of seriesonto HDD repeatedly using Series timer recording, the unit willrecord the new programme over the old one.This function can be used only when weekly, daily or seriestimer recording is selected.1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press [OK].3 Press [2, 1] to select “RENEW”column.4 Press [3, 4] to select “ON” and press[OK].≥If a programme set for Auto Renewal Recording is protected orwhile play back is taking place from the HDD, or while copying, theprogramme will not be overwritten. Instead the programme set forrecording will be saved as a separate programme, and thisprogramme will be the one to be overwritten when the next AutoRenewal Recording takes place.≥Playlists made from programmes that were set for Auto RenewalRecording are deleted along with auto renewal.≥When there is not enough space on the HDD, the programme maynot be recorded completely.To cancel recording when recordinghas already begunTo release the unit from recordingstandbyNo. ChannelARD01Timer iconModeStop HDDDVD DrivespaceogrammeHDD SP OK22:30TUE 14.10.09. 12:56:00Check to make sure “OK” isdisplayed (> 28).Stop RecordingStop Recording CancelTimer recording in progress.Stop this timer recording ?It will be cancelled if you stop.OK RETURNSELECTRelief RecordingAuto Renewal RecordingTimerRecording 1:58 SPDVD30:24 SPHDDRemainModeStopStartChannel Date HDDDVD22:3022:00SUN HDD1 ARDProgramme NameSPRENEWONAll Channels : ARDTUE 14.10.09. 12:53:00Note