Panasonic Diga DMR-EX89 Operating Instructions Manual

Also see for Diga DMR-EX79: Operating instructions Operating instructions Operating instructions

Contents

68RQT9414Changing the unit’s settings(All factory default settings are indicated with underlined text.)AV2 SettingsSet to match the connected equipment.≥Press [OK] to show the following settings.AV2 InputSet to “RGB / Video” or “RGB” when receiving or recording RGBoutput from external equipment.[RGB / Video] [RGB] [Video] [S Video][For]France,[Italy,[Spain[and[Switzerland]AV2 ConnectionThis setting is fixed with “Ext” if you set “TV System” to “NTSC”(> 67).[Decoder] When a decoder is connected to descramble thescrambled signals (e.g., C+decoder).[Ext] When the VCR or a digital satellite receiver isconnected.Ext LinkThis setting cannot be made when the “TV System” is set to“NTSC” (> 67).[Ext Link 1] When a digital satellite receiver which transmits aspecial control signal recordings via the 21-pinScart cable is connected.Start and stop timings of recording are controlledby the control signal.[Ext Link 2] When external equipment with a timer function isconnected.When it turns on, recording starts.When it turns off, recording stops.[For]Germany[and]Austria[Active Antenna[On] Select this when you will use indoor antenna that is notequipped with power supply.[Off]OthersRemote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonic productsclose together.[DVD 1] [DVD 2] [DVD 3]Use “DVD 1”, the factory set code, under normal circumstances.1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].∫ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remotecontrol to match the main unit’s(> step 2).Executing “Shipping Condition” in the Setup menu returns the mainunit code to “DVD 1”. Change the remote control code to 1(> step 2).SetupTuningRemote ControlPress “” and “OK” togetherfor more than 5 seconds on the remotecontrol.DiscPictureNoteClockThis unit usually obtains time and date information from digitalbroadcasts and automatically corrects the time several times aday. However, if the time is not set correctly, use the settings listedin the method below.1 Press [3, 4] to select “Off” of “Automatic” and press [OK].2 Press [2, 1] to select the item you want to change.The items change as follows:Hour!#Minute!#Second!#Day!#Month!#Year^-----------------------------------------------------------------------------------------J3 Press [3, 4] to change the setting.You can also use the numbered buttons for setting.4 Press [OK] when you have finished the settings.The clock starts.If a TV station transmits a time setting signal, and when“Automatic” in the Clock setting menu is set to “On”, the automatictime correction function checks the time and if necessary it isadjusted several times every day.[For]France,[Italy,[Spain[and[Switzerland]∫ To change the time offsetWhen the time is not correct, set “Time offset” (from –2h to +2h).1 Press [3, 4] to select “On” of “Automatic” and press [OK] instep 1.Auto clock setting starts. This takes a few minutes.“Automatic clock setting completed.” screen is displayed.2 Press [1].3 Press [3, 4] to select the correct time offset and press [OK].4 Press [RETURN ].ClockAutomaticTime DatePlease set clock manually.OK: store RETURN: leaveOK RETURNSELECTCHANGEOff15 : 45 : 39 1 . 8 . 20080 9Number[For]Germany[and]Austria[e.g., This screen appearswhile receiving a digitalbroadcast.ClockTimeAutomatic Time offsetDateAutoPlease set clock manually.OK: store RETURN: leaveOK RETURNSELECTCHANGE15 : 45 : 39 3 . 8 . 2008Off0 9Number[For]France,[Italy,[Spain[and[Switzerland]e.g., This screen appearswhile receiving a digitalbroadcast.Time offset > belowNote