Record mode31LSQT0860Tele-macro functionBy focusing only on the subject and blurring thebackground, the image can be impressive. ThisCamcorder can focus on the subject at a distanceof approx. 16 inches (40 cm).≥Set to Tape/Card Recording Mode.1 Press the joystick until the icon 1 appears.2 Move the joystick up to select thetele-macro icon [ ].≥If the magnification is 10k or less, then it isautomatically set to 10k.ª To cancel the tele-macro functionSelect the [ ] icon again.≥If a sharper focus cannot be achieved, adjustthe focus manually.≥In the following cases, the tele-macro function iscanceled.≥The zoom magnification becomes lower than10k.≥The [OFF/ON] switch or the mode dial isoperated.Fade in/fade out functionFade inThe image and audio gradually appear.Fade outThe image and audio gradually disappear.≥Set to Tape Recording Mode.1 Press the joystick until the icon 1 appears.2 Move the joystick left to select the fade icon[ ].3 Press the recording start/stop button.Start recording. (fade in)When you start recording, the image/audiodisappears completely and the image/audiogradually appears.Pause recording. (fade out)The image/audio gradually disappears. After theimage/audio completely disappears, recordingstops.ª To cancel fadingSelect the [ ] icon again.ª To select the color for fade in/outThe color which appears in fading pictures can beselected.1 Set [SETUP] >> [FADE COLOR] >> [WHITE]or [BLACK].≥While the fade in/fade out function is selected, ittakes several seconds to display the imagewhen you start recording images. Besides, italso takes several seconds to pause recording.Wind noise reduction functionThis reduces the wind noise coming into themicrophone when recording.≥Set to Tape Recording Mode.1 Set [BASIC] >> [WIND CUT] >> [ON].ª To cancel the wind noise reductionfunctionSet [BASIC] >> [WIND CUT] >> [OFF].≥Reduces the wind noise depending on the windstrength. (If this function is activated in strongwinds, the stereo effect may be reduced. Whenthe wind weakens, the stereo effect will berestored.)11B
