Edit mode44LSQT0860Audio dubbingYou can add music or narration to the recordedcassette.≥Set to Tape Playback Mode.1 Insert an external microphone securely intothe [MIC] terminal as far as it will go.2 Find a scene that you want to add sound to,and press the [;] button on the remotecontrol.3 Press the [A.DUB] button on the remotecontrol to make audio dubbing ready.4 Press the [;] button on the remote controlto start audio dubbing.≥Talk into the microphone.5 Press the [;] button on the remote controlto stop audio dubbing.≥If a tape has a non-recorded portion when thetape is dubbed, images and sounds may bedisturbed when this portion of the tape is playedback.ª Before recording with audio dubbing≥Set to Tape Recording Mode.≥When you want to preserve the original soundtaken during recording, set [SETUP] >>[AUDIO REC] >> [12bit] to take pictures. (Whenset [16bit], the sounds taken during recordingare erased after recording with audio dubbing.)≥Set [BASIC] >> [REC SPEED] >> [SP] to takepictures.ª To play back the sound recorded withaudio dubbingYou can switch between the sound recorded withaudio dubbing and the original sound.Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].[ST1]: It only plays back the original sound.[ST2]: It only plays back the sound added byaudio dubbing.[MIX]: It simultaneously plays back the originalsound and the sound added with audiodubbing.ª To dub audio while listening to apre-recorded sound≥When a microphone is used for audio dubbing,use headphones to listen to the pre-recordedsound while dubbing the audio. (When usingheadphones, set [AV JACK] >> [OUT/Ë].)When you set [SETUP] >> [12bit AUDIO] >>[ST2], you can check the pre-recorded sound.MICSTOPV/REWSTILL ADV VOLPLAYPAUSEFF/WSTILL ADVW ;V/REWSTILL ADV VOLZOOM¥REC A.DUBPLAYPAUSEFF/WSTILL ADVTWA.DUB ;STOPV/REWSTILL ADV VOLPLAYPAUSEFF/WSTILL ADVW A.DUB ¥STOPV/REWSTILL ADV VOLPLAYPAUSEFF/WSTILL ADVW
