Menu navigationENGLISH - 17[COMMAND] Detailed settings of[COMMAND] Description[INPUT][SDI OPT1 [SLOT1]]*1 Switches the input to SDI OPT1 of the Interface Board.[SDI OPT2 [SLOT1]]*1 Switches the input to SDI OPT2 of the Interface Board.[SDI OPT1 [SLOT2]]*2 Switches the input to SDI OPT1 of the Interface Board.[SDI OPT2 [SLOT2]]*2 Switches the input to SDI OPT2 of the Interface Board.[SDI OPT1 [SLOT]]*3 Switches the input to SDI OPT1 of the Interface Board.[SDI OPT2 [SLOT]]*3 Switches the input to SDI OPT2 of the Interface Board.*1 This is displayed when this Interface Board is installed in 1>.*2 This is displayed when this Interface Board is installed in 2>.*3 This is displayed when this Interface Board is installed in .14) Press the button.f The command is fixed and n is displayed at the left of the selected command.f After the command is fixed, press the 15) Press asqw to select [STORE], and press the button.Notef To delete a command that has been already set, press the button on the remote control while the screen in Step 7) isdisplayed, or select [DELETE] at the screen in Step 8) and press the button.f If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest commandnumber.f The operation is performed with the local time set in the projector.f If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in[SCHEDULE] is executed, the command set with the schedule function may not be executed.[REMOTE2 MODE]Set the terminal.1) Select [PROJECTOR SETUP] from the main menu.2) Press the button.f The [PROJECTOR SETUP] screen is displayed.3) Press as to select [REMOTE2 MODE].4) Press qw to switch to [USER].f The items will switch each time you press the button.[DEFAULT] Uses pin assignment of the terminal in standard setting of the projector.[USER] Changes the setting of the terminal.5) Press the button.f The [REMOTE2 MODE] screen is displayed.6) Press as to select one from [PIN3] to [PIN7], and press qw to switch the setting.f The items will switch each time you press the button.[SDI OPT1 [SLOT1]]*1 Sets the pin to the SDI OPT1 input of the Interface Board.[SDI OPT2 [SLOT1]]*1 Sets the pin to the SDI OPT2 input of the Interface Board.[SDI OPT1 [SLOT2]]*2 Sets the pin to the SDI OPT1 input of the Interface Board.[SDI OPT2 [SLOT2]]*2 Sets the pin to the SDI OPT2 input of the Interface Board.[SDI OPT1 [SLOT]]*3 Sets the pin to the SDI OPT1 input of the Interface Board.[SDI OPT2 [SLOT]]*3 Sets the pin to the SDI OPT2 input of the Interface Board.*1 This is displayed when this Interface Board is installed in 1>.*2 This is displayed when this Interface Board is installed in 2>.*3 This is displayed when this Interface Board is installed in .
