Panasonic FP0R Series User Manual

Also see for FP0R Series: Programming manual User manual User manual User manual

Contents

4.4 Analog I/O Unit (FP0R-A21/A42)4-27 Sample program (FP0R-A42: (For ranges of 0 to 10 V, 0 to 5 V and 0 to 20 mA)[ F65 WAN , WX3 , H3FFF , DT3 ][ F0 MV , WX2 , DT2 ]X3Eⓒ①ⓓ[ F65 WAN , WX3 , H3FFF , DT1 ][ F0 MV , WX2 , DT0 ]X3Eⓐ①ⓑ① X3E The channels of conversion data read by turning on/off the conversion data switching flags X3F andX3E are distinguished.ⓐ The conversion data of CH0 is stored into DT0.ⓑ The most significant two bits are masked by "00" with F65 WAN (AND) instruction, and the data is stored inDT1. (Note)ⓒ The conversion data of CH2 is stored into DT2.ⓓ The most significant two bits are masked by "00" with F65 WAN (AND) instruction, and the data is stored inDT3.(Note):In the case of data of CH1, it can be replaced with the transfer instruction F0 MV as the conversion dataswitching flag is "00".