- 138 -You can confirm the recording screen of this unit from outside using a smartphone.Preparations before using [Hom.Monitor]1 Check if the wireless access point is compatible with IEEE802.11b/g/n.2 Install the smartphone application “Image App” on your smartphone. (l 156)3 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-compatible), or iOS device.≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on thedevice will be displayed when starting up the “Image App”.4 Set up a Wi-Fi connection between this unit and the wireless access point.≥ [Easy Connection (WPS)] (l 159)≥ Searching for wireless access points to set up a connection (l 160)≥ Setting up a connection manually (l 161)When the Wi-Fi connection is complete, proceed to “Using [Hom.Monitor]”.≥ Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with thesmartphone application “Image App”. (l 158)Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250][Hom.Monitor]≥ Switch the Wi-Fi setting to off on your smartphone and use with mobile network suchas 3G.≥ If [CLOCK SET] (l 20) is not set correctly, [Hom.Monitor] cannot be used.≥ Check your contract details carefully, as smartphone and internet contract details mayresult in high communication charges being incurred, or a limit placed oncommunication traffic.Caution:This function is not designed for anti-theft or disaster use.XXXXXXXXX
