- 144 -Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictureson the TV.A DLNA-compatible TVPreparations before using [DLNA Play]1 Check if the wireless access point is compatible with IEEE802.11b/g/n.2 Check if the TV is DLNA-compatible.3 Set up a Wi-Fi connection between this unit and the wireless access point.≥ [Easy Connection (WPS)] (l 159)≥ Searching for wireless access points to set up a connection (l 160)≥ Setting up a connection manually (l 161)When the Wi-Fi connection is complete, proceed to “Playing back on a TV”.≥ Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with thesmartphone application “Image App”. (l 158)Playing back on a TVYou can play back the scenes and still pictures recorded with or stored in this unit on a TV.≥ The following scenes can be played back:j Scenes recorded in AVCHD [HG]/[HE]j Scenes recorded in MP4/iFrame [720]j Scenes saved in MP4 (High Quality) or MP4 (Low Quality)1 Press Wi-Fi button and touch [DLNA Play].≥ If you touch [Change AP], you can switch the wireless access point to another one that has beenregistered to this unit.≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.≥ When the connection is complete, the screen of this unit turns off. To display it again, touch thescreen.Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250][DLNA Play]≥ Please read the operating instructions for the TV about connecting TV to the wirelessaccess point.≥ Do not remove the SD card in playing back on a TV.
