- 163 -Setting up a direct connection to a smartphoneCheck if the smartphone you are using is compatible with WPSj If the smartphone is compatible with WPS:Proceed to the following [Easy Connection (WPS)]j If the smartphone is not compatible with WPS:Proceed to the following “Connecting with QR code”1 Press Wi-Fi button and touch [Wi-Fi Setup].2 Touch [Direct Connection].3 Touch [Change connection type].4 Touch [Easy Connection (WPS)].5 Set the smartphone to WPS Mode.1 Press Wi-Fi button and touch [Wi-Fi Setup].2 Touch [Direct Connection].3 Touch [Change connection type].4 Touch [QR code].≥ QR code is displayed on the screen of this unit.5 Start up the smartphone application “Image App”.6 On the smartphone, select [QR code] to scan the QR code displayed on thescreen of this unit.≥ When using an Android device, the smartphone and this unit are connected directly, allowing youto use remote operations. (l 131)≥ When using an iOS device, perform the following operations:1 Select the option that allows you to install the app on the profile screen of the “Image App”, andfollow the on-screen instructions to complete the installation.2 Press the home button to close the displayed screen.3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.≥ When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”.(l 164)[Easy Connection (WPS)]Confirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screenConnecting with QR codeConfirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screen
