- 142 -≥ Even with a broadband line, the recommended optimal speed may not be reached depending onyour environment.≥ Narrowband lines such as analogue modems cannot be used.≥ If the line for the smartphone is switched, communication may be interrupted. In that case,connect again.≥ Refer to [Help] in the “Image App” menu about how to operate.What you can operate/set with a smartphone during home monitoring∫ What you can operate with a smartphoneConfirm the condition inside the houseThe monitoring video can be confirmed.≥ The monitoring image can be recorded as a video or a still picture.≥ It cannot be confirmed with multiple smartphones simultaneously.≥ Depending upon the environment in which the device is used, motion picture may be like aframe rate is low.Voice messageThe smartphone and this unit can be used like radio transceivers, allowing the users to have aconversation by taking turns.≥ You can talk up to 10 seconds in 20 second interval.≥ Open the LCD monitor of this unit when using the Voice message function.∫ What you can set with a smartphoneMoving/non-moving object detectionThis unit can detect moving objects and non-moving objects in the home monitoring detection area.≥ Once this unit is set to home monitoring (home monitoring standby state), it cannot detectmoving objects for up to 5 minutes.≥ Detection of some moving and stationary subjects may not be possible due to the condition ofthe subject. Check beforehand to see if detection of the moving or stationary object can bedetected.≥ If the movement of the subject is too fast or too slow, if the subject is too small, or if thesurroundings are too dark, detection of moving and stationary objects may be impossible.Automatic recordingYou can record a motion picture on this unit as it detects a moving or non-moving object.≥ Automatic recording will record for approximately 30 seconds.≥ Automatic recording can record a maximum of 1 hour 15 minutes per day. Check the remainingavailable recording time.≥ When automatic recording is performed with moving object detection, automatic recording isperformed only once within the set time.≥ When automatic recording is performed with non-moving object detection, the set time will bereset and non-moving object detection will start again.
