- 199 -Keep this unit as far away as possible fromelectromagnetic equipment (such asmicrowave ovens, TVs, video games etc.).≥ If you use this unit on top of or near a TV, thepictures and/or sound on this unit may bedisrupted by electromagnetic wave radiation.≥ Do not use this unit near cell phones becausedoing so may result in noise adverselyaffecting the pictures and/or sound.≥ Recorded data may be damaged, or picturesmay be distorted, by strong magnetic fieldscreated by speakers or large motors.≥ Electromagnetic wave radiation generated bymicroprocessors may adversely affect thisunit, disturbing the pictures and/or sound.≥ If this unit is adversely affected byelectromagnetic equipment and stopsfunctioning properly, turn this unit off andremove the battery or disconnect AC adaptor.Then reinsert the battery or reconnect ACadaptor and turn this unit on.Do not use this unit near radio transmittersor high-voltage lines.≥ If you record near radio transmitters orhigh-voltage lines, the recorded pictures and/or sound may be adversely affected.Make sure to use the supplied cords andcables. If you use optional accessories, usethe cords and the cables supplied withthem.Do not extend the cords and the cables.Do not spray insecticides or volatilechemicals onto the unit.≥ If the unit is sprayed with such chemicals, itsbody may be marred and the surface finishmay peel off.≥ Do not leave rubber or plastic products incontact with the unit for a long time.When you use the unit in a sandy or dustyplace such as a beach, do not let sand orfine dust get into the body and terminals ofthe unit.Also, keep the unit away from sea water.≥ Sand or dust may damage the unit. (Careshould be taken when inserting and removinga card.)≥ If sea water splashes onto the unit, wipe offthe water with a well wrung cloth. Then wipethe unit again with a dry cloth.When carrying the unit, do not drop or bumpit.≥ A strong impact can break the unit’s casing,causing it to malfunction.Cleaning≥ Before cleaning, detach the battery or pull theAC adaptor from the AC outlet, and then wipethe unit with a soft, dry cloth.≥ If the unit is very dirty, dip a cloth in water andsqueeze firmly, and then wipe the unit withthe damp cloth. Next, dry the unit with a drycloth.≥ Use of benzine, paint thinner, alcohol, ordishwashing liquid may alter the camera bodyor peel the surface finish. Do not use thesesolvents.≥ When using a chemical dust cloth, follow theinstructions that came with the cloth.OthersCautions for useAbout this unitThe unit and the SD card become warmduring use. This is not a malfunction.
