- 124 -≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with anyother USB cables.)≥ Scenes recorded as Backup for Twin Camera will be saved as normal AVCHD scenes whendubbed on a Panasonic Blu-ray disc recorder or a DVD recorder.≥ When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USBcable while the unit is turned on, power is also supplied from the connected equipment to thisunit.≥ For details on dubbing and playback methods, read the operating instructions of the Blu-ray discrecorder or DVD recorder.≥ When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appearon the television connected to the Blu-ray disc recorder. In this case as well, perform theoperations of Steps 1 to 3.≥ You cannot switch the Recording Mode/Playback Mode by pressing the recording/playbackbutton on this unit while the Blu-ray disc recorder or DVD recorder is connected. Disconnect theUSB cable before performing either of these operations.≥ If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorderto cancel the dubbing.3 Dubbing through operations on the Blu-ray disc recorder or high-definition(AVCHD) compatible DVD recorder.About the screen indication of the unit≥ When the unit is accessing the SD card, card access icon ( ) appears on the unit screenor the access lamp is on.≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessingthe media, as this may result in the loss of recorded content.
